| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Cragar Soft 8 w/No Lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=69713 |
Page 1 of 1 |
| Author: | cjb_kj06 [ Wed Jul 25, 2012 1:45 pm ] |
| Post subject: | Cragar Soft 8 w/No Lift |
Just ordered a set of Cooper Discoverer A/T 3 235/70/16's and was looking to pair them with some Black 16x7 Cragar Soft 8's with 4" of backspace. Will these rims work without a lift? |
|
| Author: | CoopaTroopa [ Wed Jul 25, 2012 1:52 pm ] |
| Post subject: | Re: Cragar Soft 8 w/No Lift |
Without a lift the backspacing will most likely cause some rubbing. |
|
| Author: | cjb_kj06 [ Wed Jul 25, 2012 2:00 pm ] |
| Post subject: | Re: Cragar Soft 8 w/No Lift |
Is that because of the tires I picked or does it have to do with the backspacing? Rubbing just when turning or all the time? Could the rubbing be dealt with or would it ruin the tires? |
|
| Author: | CoopaTroopa [ Wed Jul 25, 2012 3:02 pm ] |
| Post subject: | Re: Cragar Soft 8 w/No Lift |
The tires are fine, its the back spacing on the rims that will get you in trouble. If you arent lifted try staying as close to stock when it comes to back spacing. You should only have rub during turns. |
|
| Author: | tommudd [ Wed Jul 25, 2012 3:03 pm ] |
| Post subject: | Re: Cragar Soft 8 w/No Lift |
Backspacing unlifted its best to stay as close as possible to stock Tire / wheel combo will sit out and hit flare/bumper/pinchweld etc If you want to hack away enough plastic they may work but i wouldn't do it Paint your stockers, save some bucks and install 245-70-16s |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|