Anyone else experience a higher front end stance after installing new a-arms and ball joints? Front end is currently about an inch talker now than before I swapped out the worn OEM crap for JBA's units. Double and even triple checked everything to maker sure we did it right. Before you ask, yes...........we didn't tighten anything up until the full weight if the CRD was resting on the suspension and two of us (combined 400lb) on it hard to settle it.

_________________
2005 Black CRD KJ____Full GDE turbo kit, EHM, 6.5L GMCTD lift pump, euro tq conv, 31" Duratracs on 15x7 Procomps w/3.75"bs
2.5" lift, full skids, Super Skink Sliders, front JBA Steel Diff w/True-Trac___Powertax "No-Slip" locker rear
Tow Rig: 2003 Silver 2wd Dodge 2500 reg. cab 5.9 Cummins (highly modded with 550hp/1200tq+)

Has it been aligned yet if not
there ya go

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Well, had the alignment done today.........and still no change!!! Not that I'm complaining, as it sits level now actually.

_________________
2005 Black CRD KJ____Full GDE turbo kit, EHM, 6.5L GMCTD lift pump, euro tq conv, 31" Duratracs on 15x7 Procomps w/3.75"bs
2.5" lift, full skids, Super Skink Sliders, front JBA Steel Diff w/True-Trac___Powertax "No-Slip" locker rear
Tow Rig: 2003 Silver 2wd Dodge 2500 reg. cab 5.9 Cummins (highly modded with 550hp/1200tq+)

Control arms do not provide lift

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I know they don't, but the fact still remains..........the front end is sitting approx 1" taller now than before.

_________________
2005 Black CRD KJ____Full GDE turbo kit, EHM, 6.5L GMCTD lift pump, euro tq conv, 31" Duratracs on 15x7 Procomps w/3.75"bs
2.5" lift, full skids, Super Skink Sliders, front JBA Steel Diff w/True-Trac___Powertax "No-Slip" locker rear
Tow Rig: 2003 Silver 2wd Dodge 2500 reg. cab 5.9 Cummins (highly modded with 550hp/1200tq+)

I thought the opposite happened. I just put in the Arms and added a slight clevis lift...not level though. (Didn't want it to be)

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited