LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Neoprene Rubber spacers for rear
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=7038		 Page 1 of 1
Author:  GPR65 [ Sat Mar 25, 2006 10:39 pm ]
Post subject:  Neoprene Rubber spacers for rear
What was the part number for these spacers on Mcmaster and Carr's website?

Chris
Author:  GPR65 [ Sun Mar 26, 2006 9:53 pm ]
Post subject: 
*bump
Author:  the1jferg [ Mon Mar 27, 2006 9:29 am ]
Post subject: 
Thats wetsuit material, I can't think of a worse material for spacers???
Author:  GPR65 [ Mon Mar 27, 2006 10:32 am ]
Post subject: 
Somebody had posted a while back doing the clevis lift up front and adding a spacer to the rear and it was some sort of rubber that was around 1/2 inch thick. It was off of the mcmaster and carr website and i cant find the old post. www.mcmaster.com


Chris
Author:  Neal [ Mon Mar 27, 2006 10:40 am ]
Post subject: 
I added two more spring isolators to each side at the top of spring--dealer item
Author:  the1jferg [ Mon Mar 27, 2006 11:03 am ]
Post subject: 
Trace your iso pad onto a 1/2" truck mudflap and cut it out
Author:  sqliberty [ Mon Mar 27, 2006 11:56 am ]
Post subject: 
Do you mean polyurethane? http://www.energysuspension.com/pages/sboots.html
Author:  GPR65 [ Mon Mar 27, 2006 3:26 pm ]
Post subject: 
BTW i found them on the website and they are neoprene rubber the part number is 8455k11. :wink:
Author:  kevh [ Mon Mar 27, 2006 5:44 pm ]
Post subject: 
neoprene comes in different densities. dont think of all neoprene as the stuff wetsuits are made of. the denses neoprene is a material similar to thick rubber
Author:  sqliberty [ Mon Mar 27, 2006 8:28 pm ]
Post subject: 
Thats whats so cool about this site, always learning
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/