My jeep goes straighter and rides much better. The install wasnt fun but airtools helped. Thanks Al.

CHris

_________________
2003 Renegade 4x4
Rustys 2.5 spring and cleavis lift
Moabs and MT/Rs
Auburn LSD
Lots of other goodies.

Any pictures with those new A- arms?

_________________
06' Black Commander with HEMI and Quadra Drive II

Hey Chris,
Care to do a quick write-up?
I'll be installing mine very soon.

_________________
Take the road less traveled.

well i used the write up in the tech section it is under replacing ball joints. I do recommend 10 inches in ratchet extensions and an air ratchet. It makes things faster and less tedious and thanks also goes out to my cousin Jason. It helps to have a person hold the arms in while you put the bolts through.

CHris

_________________
2003 Renegade 4x4
Rustys 2.5 spring and cleavis lift
Moabs and MT/Rs
Auburn LSD
Lots of other goodies.

I can tell you on the driver's side rear nut, do not drop it! There is a hole in the frame right under it. If you drop it in the hole, it could be hell to get out. I've done it, and it aint fun.

_________________
'13 JK Unlimited
'07 Goat 4x4
Old School L.O.S.T. Member
L.O.S.T. #DA050656
Republica de Tejas

I have to say, when I replaced mine, it wasn't as bad as I thought it was going to be. But, I have the air tools available. I didn't even take out the battery tray. But, I did take out the air box. The driver's side back one was the hardest one to get to. So I did that side first and getting the holes lined up wasn't as bad as I thought it was going to be. The bushings fit it snug enough to hold itself in place for me to line up the hole and put the bolt in.
Not too big of a deal. Air Tools are definitely recommended.

_________________
Wayne
Used to have a NICE KJ
Check out my cardomain to see

Cool.
Thanks for the tips.

I'll be doing both uppers and lowers, so it should be interesting.

_________________
Take the road less traveled.