| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Np242 to NV241OR http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=70688 |
Page 1 of 1 |
| Author: | audiboy86 [ Sun Sep 02, 2012 12:10 pm ] |
| Post subject: | Np242 to NV241OR |
I know of a few people who have done the command-Trac to the Roc-Trac. Well I am going to attempt the select-Trac to roc-Trac I know it will easily fit. But my question is about the linkage I know the command-Trac linkage will work easily but what about the select-tracs. Does anyone have diagrams of the linkages or atleast the differences. |
|
| Author: | tjkj2002 [ Sun Sep 02, 2012 8:26 pm ] |
| Post subject: | Re: Np242 to NV241OR |
You can use your current shifter but part time 4wd selection will be 4 low,full time selection will be "N","N" will be part time 4wd,and 4 low will be 2wd.Your current 2wd selection will be dead and the shifter will not even move to it.Could pick a 231 shifter from a wrecked KJ to work better but the selections will be backwards still. |
|
| Author: | audiboy86 [ Sun Sep 02, 2012 9:43 pm ] |
| Post subject: | Re: Np242 to NV241OR |
I can find the shifters for cheap most without the cable though how hard is it to just replace the cable? And could I just use my current cable? |
|
| Author: | tjkj2002 [ Tue Sep 04, 2012 9:43 am ] |
| Post subject: | Re: Np242 to NV241OR |
I can not say,I've never tried but I'm sure you can as long as the select trac cable mounts to the command trac shifter I don't see why not. |
|
| Author: | audiboy86 [ Tue Sep 04, 2012 12:24 pm ] |
| Post subject: | Re: Np242 to NV241OR |
Does anyone remember the issues with the command-trac shifter? Was it the pattern or the to many options? |
|
| Author: | tjkj2002 [ Tue Sep 04, 2012 2:36 pm ] |
| Post subject: | Re: Np242 to NV241OR |
audiboy86 wrote: Does anyone remember the issues with the command-trac shifter? Was it the pattern or the to many options? The only issue is the pattern is reversed so what your used to being 4 low is now 2wd and what your used to being 2wd is now 4low with the command trac shifter. |
|
| Author: | audiboy86 [ Tue Sep 04, 2012 6:03 pm ] |
| Post subject: | Re: Np242 to NV241OR |
I meant command Trac what was the issues with its pattern? Or with it in general or has it even been tested by anyone. Since I will have 2h 4h N 2lo 4lo how will that work out even with the select-Trac? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|