| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front Hitch Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=7141 |
Page 1 of 1 |
| Author: | LostRenegade [ Tue Mar 28, 2006 8:43 pm ] |
| Post subject: | Front Hitch Question |
I just installed a Hidden Hitch front hitch on my 2003 Liberty Renegade. The hitch is two piece. What kind of draw backs will I have? Has anyone used it with a winch? |
|
| Author: | lilmatty [ Tue Mar 28, 2006 10:58 pm ] |
| Post subject: | Re: Front Hitch Question |
LostRenegade wrote: Has anyone used it with a winch?
Yup and not a problem... |
|
| Author: | RedJeepCRD [ Wed Mar 29, 2006 3:16 pm ] |
| Post subject: | |
Should be no problem, I went with the Drawtite due to the tow loops welded on both sides. Drawtite is harder to install though. I think the rating of the hidden hitch two piece is slightly lower, But hitches have a 100% failure rating which means it can support twice it's rating before failure. I wouldn't exceed the rating but I doubt you could break the hidden hitch. Wes |
|
| Author: | Jeepjeepster [ Wed Mar 29, 2006 4:29 pm ] |
| Post subject: | |
RedJeepCRD wrote: Should be no problem, I went with the Drawtite due to the tow loops welded on both sides. Drawtite is harder to install though. I think the rating of the hidden hitch two piece is slightly lower, But hitches have a 100% failure rating which means it can support twice it's rating before failure. I wouldn't exceed the rating but I doubt you could break the hidden hitch.
Wes I would worry about pulling it out of the frame before it breaking. Stupid uni-body. 
|
|
| Author: | kickit_in4wheel [ Thu Mar 30, 2006 1:17 am ] |
| Post subject: | |
Quote: I would worry about pulling it out of the frame before it breaking.
Likewise. That Hidden Hitch is a tough piece. I bet you'd tweak the unibody or break something else before either hitch gives in. Rick |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|