I Lifted my 2002 Jeep Liberty Sport 4x4 2 1/2 inch upper strut spacer, Question is do i need to Replace the upper a frame arm with an extended one on this particular lift? Please Help

I dont want too buy a part that i dont need there is no Rubbing on spring or tires.... tire size are 31" Dominators.....

_________________


2002 Black Jeep Liberty Sport 4x4
3.7L V6 Engine
Tire size: 255/70/R16 Cooper Dominators
Hidden Hitch / Recovery Hook
Black Brushguard
Recovery gear bag
Front fog/Driving lights
Odometer/ 89593 miles as of 11/28/2012

(OIIIO) JUST SHOW ME THE WAY (OIIIO)

man you can see the future

Yea, i just noticed that couple days ago.....funny booty hell....I actually have 94000 original miles so I'm pretty close...lmao

_________________


2002 Black Jeep Liberty Sport 4x4
3.7L V6 Engine
Tire size: 255/70/R16 Cooper Dominators
Hidden Hitch / Recovery Hook
Black Brushguard
Recovery gear bag
Front fog/Driving lights
Odometer/ 89593 miles as of 11/28/2012

(OIIIO) JUST SHOW ME THE WAY (OIIIO)

You'll have to before long with that spacer style lift since they tend to eat up UCAs
If it was a 2.5 inch full spring , no
But with the 2.5 inch upper strut spacer just a matter of time
Throw some teraflex bumpstops in the front will help a little bit possibly

by the way measure from middle of the wheel to bottom of flare as well
just curious

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited