| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Urgent Help required with ABS Pump problem http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=72018 |
Page 1 of 1 |
| Author: | The Big Boulonnais [ Mon Oct 15, 2012 12:06 pm ] |
| Post subject: | Urgent Help required with ABS Pump problem |
Hi Guys, I need badly the help of anyone who knows or has experienced the problem I have with my new ABS unit. I live in England and I have a Right Hand Drive KJ 2.8 L Turbo Diesel CRD manual Gear box that I bought brand new in 2007 but built in 2006 (according to the VIN). I've had a problem with the brakes for about 18 months now. The car stops when the brake pedal is depressed but if I leave my foot on the pedal once the car has stopped the brake pedal keeps going down instead of staying at a steady level. This was getting that bad that the pedal was almost touching the floor so I took my KJ to my local mechanic and friend of long date. He advised me to buy a new brake booster. So I ordered an OEM Mopar one from Tampa Florida and my mechanic replaced it but the problem remained. He told me then that the cause was the Master cylinder so I bough one from Tampa again. He replaced it but the problem remained. He told me then there was nothing else to replace but the ABS unit so I bought a brand new ABS Control unit and ABS module (pump) and now having replaced the parts he informed that all the warning lights related to the brakes are on in the Dashboard!! I spoke to him on the phone 1 hour ago and he told me that he connected a computer to the car to find a code for the fault but nothing. He then removed the new ABS pump and put back the old pump and he said all the warning lights in the dashboard are now off. He asked me to email the supplier of the parts in Florida to ask if there isn't an inversion of wire to do because in US the cars are Left Hand drive and mine is Right hand drive. I checked the site of the OEM Mopar parts and anyway the parts have the same reference (so are the same) for the Left Hand drive and the Right Hand drive Liberty Diesel or Petrol and even the same for the Jeep Commander!!! I am desperate to get this done because my car is now due for MOT wich is a yearly safety check compulsory in UK and without it I am not allowed to drive the car or in case of an accident my insurance would be void. If any of you guys have had this problem or know someone who can help me, please give me a shout. Regards, Chris Hythe, Kent, UK |
|
| Author: | tjkj2002 [ Mon Oct 15, 2012 8:02 pm ] |
| Post subject: | Re: Urgent Help required with ABS Pump problem |
If the brain box part of the ABS pump module was also replaced,the part were the wire connectors are plugged into,then you have to have that module programmed at the dealership for it to work right. |
|
| Author: | The Big Boulonnais [ Tue Oct 16, 2012 7:52 am ] |
| Post subject: | Re: Urgent Help required with ABS Pump problem |
Hi tjkj2002, Thank you very much for your help. After I posted my message on here I called the Spare parts supplier in Tampa and with the VIN number he confirmed that I've got the correct ABS module for my Right Hand drive 2.8l CRD but he also told me like you to get the ABS module programmed by a Jeep garage. I told my mechanic and he is on the case so I keep my fingers crossed. Thanks for your time. Chris |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|