| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| High RPM and Surging http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=72230 |
Page 1 of 1 |
| Author: | mikeandamy1013 [ Wed Oct 24, 2012 7:37 am ] |
| Post subject: | High RPM and Surging |
Hey all, I'm new to this board and new to my jeep. I have had it for a year and had a few issues with it. I have been a member of jeepkj and this board comes highly praised so i thought I would give it a shot and so far I've found it to be a great source of information, So thank you to all the people that contribute and have the experience because it really helps those of us that want to learn. So my newest issue seems to be a high rpm (~1100 at idle) and when just cruising without applying gas (~1600). it doesn't happen all the time it's random as far as engine temp and driving conditions. I have been able to put it into neutral and rev the engine a couple times and get the rpms back to normal but a couple times when i put it in neutral the trans "slammed" which is pretty concerning. This issue didn't start until after i cleaned my IAC for another issue i was having with cold starts in the a.m. which hasn't been a real issue lately. I have recently replaced the TPS(on Friday morning) with a mopar one from the dealer and cleaned the IAC again (it was still clean but i did it anyways). I cleaned the throttle body and plate(pretty clean before i started) as well as the seat for the IAC which was dirty. I've checked the vacuum lines and they looked to be connected and in OK shape. Any thought or avenues on where I should go from here? UPDATE: i pulled a p1294 code today "Target idle not reached" 2nd update, put a code reader on to clear the 1294 code and saw that there was a P0736 "Gear Ratio Error in Reverse" any thoughts on this cel code as well as the p1294? |
|
| Author: | Cherrie 274 [ Sun Oct 28, 2012 9:00 am ] |
| Post subject: | High RPM and Surging |
Sorry I guess nobody has any answers. But if your taking it to the dealer, and they 'fixed it' shouldn't it be on them to really fix? Oops I see you got parts from the dealer. I read it wrong. |
|
| Author: | mikeandamy1013 [ Thu Jan 24, 2013 10:24 pm ] |
| Post subject: | Re: High RPM and Surging |
replaced the IAC and good as new |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|