Got these off ebay for $60.00 ! Seller said they were off of a 03 liberty. No part numbers on them can anyone id these ? Are they Al's ?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Upper Control Arms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=72313 |
Page 1 of 1 |
| Author: | fish1 [ Tue Oct 30, 2012 9:54 am ] |
| Post subject: | Upper Control Arms |
Got these off ebay for $60.00 ! Seller said they were off of a 03 liberty. No part numbers on them can anyone id these ? Are they Al's ?
|
|
| Author: | tommudd [ Tue Oct 30, 2012 10:19 am ] |
| Post subject: | Re: Upper Control Arms |
They could be a very early set, look like it good for wall decoration |
|
| Author: | tjkj2002 [ Tue Oct 30, 2012 10:26 am ] |
| Post subject: | Re: Upper Control Arms |
Those look like GenIII or possible GenIV JBA's.I rocked GENII's JBA's all the way up to my SFA swap. |
|
| Author: | tommudd [ Tue Oct 30, 2012 10:48 am ] |
| Post subject: | Re: Upper Control Arms |
Looking at them closer I'd say 3s If you want to try and use them check the welds near the ball joint bung very close. I had bought a used set and both were cracked at the welds. They were an very early set |
|
| Author: | fish1 [ Tue Oct 30, 2012 11:30 am ] |
| Post subject: | Re: Upper Control Arms |
Thanks for the replies. Can the welds be strengthened ? How much lift is required to use these ? I just like having greaseable ball joints. |
|
| Author: | tommudd [ Tue Oct 30, 2012 11:54 am ] |
| Post subject: | Re: Upper Control Arms |
Not really unless you know what you are doing and have some fabrication skills are the boots good on them, one looks torn, but maybe just dirt or shadow For those 2-2.5 inches Later ones have a different angle on the ball joint and also are a little longer as well I think I know where my original set of 3's are up in the attic and I also have a set of early 4.5s here. If I can round them both up, I'll take a picture and show you |
|
| Author: | fish1 [ Tue Oct 30, 2012 12:07 pm ] |
| Post subject: | Re: Upper Control Arms |
Boots are not torn,they are loose from the ball joint. I don't plan on doing a lift right now so i will just hold on to them for the time being.Thats my problem i buy parts never use them throw them in the shed.I can add them to the suspension parts i have left over from my dodge ram owell maybe i will have a yard sale someday.Need to stop clicking on that buy now button on ebay 
|
|
| Author: | tommudd [ Tue Oct 30, 2012 12:29 pm ] |
| Post subject: | Re: Upper Control Arms |
Ah I know about extra parts, I have enough to build a KJ almost except for body 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|