lift my liberty what is the best solution i think 2.5 lift with 245/75/16

Welcome to LOST. Use the search function and read. You'll find several hundred threads answering your exact question.

And Mudd, don't even think about it!
You're too easy on these guys

_________________
Elmer
2005 Jeep KJ Renegade

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Well I have an 04 but I put a 3" rough country ontop of a 2.5" rustys lift. Settled to about 5" of lift..

_________________
02 KJ Renegade = Totaled.

04 KJ Limited OME 927/948, Cragar Soft 8's, General Grabber AT2 245/75/16.

If you have 5 inches of lift then there would be issues without major mods
Of course the Rustys sag to 1 inch in no time, Rough Country gives you 2 inches and isn't a good lift
So whats the measurements ? Middle of wheel to bottom of flare in front ?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Tis' a joke you brute

OME All the way

_________________
02 KJ Renegade = Totaled.

04 KJ Limited OME 927/948, Cragar Soft 8's, General Grabber AT2 245/75/16.

I knew what you had,
was trying to determine why you'd dump a good lift for junk
But you did try and tell a good story!
Sitting here in the garage looking at mine right now thinking.........

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited