| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| jeep liberty 2002 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=72706 |
Page 1 of 1 |
| Author: | spoutnick123 [ Sun Dec 02, 2012 2:18 pm ] |
| Post subject: | jeep liberty 2002 |
lift my liberty what is the best solution i think 2.5 lift with 245/75/16 |
|
| Author: | Elmer [ Sun Dec 02, 2012 2:30 pm ] |
| Post subject: | Re: jeep liberty 2002 |
Welcome to LOST. Use the search function and read. You'll find several hundred threads answering your exact question. And Mudd, don't even think about it! You're too easy on these guys
|
|
| Author: | tommudd [ Sun Dec 02, 2012 9:31 pm ] |
| Post subject: | Re: jeep liberty 2002 |
| Author: | All3Sports [ Tue Dec 04, 2012 10:27 am ] |
| Post subject: | Re: jeep liberty 2002 |
Well I have an 04 but I put a 3" rough country ontop of a 2.5" rustys lift. Settled to about 5" of lift.. |
|
| Author: | tommudd [ Tue Dec 04, 2012 11:01 am ] |
| Post subject: | Re: jeep liberty 2002 |
All3Sports wrote: Well I have an 04 but I put a 3" rough country ontop of a 2.5" rustys lift. Settled to about 5" of lift.. If you have 5 inches of lift then there would be issues without major mods Of course the Rustys sag to 1 inch in no time, Rough Country gives you 2 inches and isn't a good lift So whats the measurements ? Middle of wheel to bottom of flare in front ? |
|
| Author: | All3Sports [ Tue Dec 04, 2012 2:35 pm ] |
| Post subject: | Re: jeep liberty 2002 |
Tis' a joke you brute OME All the way
|
|
| Author: | tommudd [ Tue Dec 04, 2012 2:58 pm ] |
| Post subject: | Re: jeep liberty 2002 |
I knew what you had, was trying to determine why you'd dump a good lift for junk But you did try and tell a good story! ![]() Sitting here in the garage looking at mine right now thinking......... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|