| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rubber cup holders http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=73395 |
Page 1 of 1 |
| Author: | dejesu [ Mon Jan 07, 2013 6:15 pm ] |
| Post subject: | rubber cup holders |
the cup holders in the front by the console- can they be removed to be washed? |
|
| Author: | tommudd [ Mon Jan 07, 2013 6:28 pm ] |
| Post subject: | Re: rubber cup holders |
If you're talking about the rubber insert, then yes they can be |
|
| Author: | dejesu [ Mon Jan 07, 2013 8:01 pm ] |
| Post subject: | Re: rubber cup holders |
tommudd wrote: If you're talking about the rubber insert, then yes they can be do you just pick them up and remove them? or do you have to get inside of something? |
|
| Author: | tommudd [ Mon Jan 07, 2013 8:23 pm ] |
| Post subject: | Re: rubber cup holders |
Just pull them up out |
|
| Author: | JeepMorrison [ Mon Jan 07, 2013 8:58 pm ] |
| Post subject: | Re: rubber cup holders |
tommudd wrote: Just pull them up out When i bought mine it was "glued" in from all the soda. Just gave it a good tug. Sent from my Home Phone using Tapatalk 2 |
|
| Author: | TheBlueKJ [ Mon Jan 07, 2013 9:05 pm ] |
| Post subject: | Re: rubber cup holders |
4x4kayak2112 wrote: tommudd wrote: Just pull them up out When i bought mine it was "glued" in from all the soda. Just gave it a good tug. Sent from my Home Phone using Tapatalk 2 That's nasty. Hope you gave them a good rinse! |
|
| Author: | JeepMorrison [ Mon Jan 07, 2013 10:54 pm ] |
| Post subject: | Re: rubber cup holders |
About once a week at work I detail my jeep inside and out. But i dont have any carpet and about to bed line the inside, so i just pull my plugs and wash it out. But all the plastic i wipe down with sani-wipes i get from the hospitals. Btw im a paramedic so i get alot of free time at work, sunday i slept for 13 hours. Not too bad. Sent from my Home Phone using Tapatalk 2 |
|
| Author: | TheBlueKJ [ Tue Jan 08, 2013 11:50 am ] |
| Post subject: | Re: rubber cup holders |
4x4kayak2112 wrote: About once a week at work I detail my jeep inside and out. But i dont have any carpet and about to bed line the inside, so i just pull my plugs and wash it out. But all the plastic i wipe down with sani-wipes i get from the hospitals. Btw im a paramedic so i get alot of free time at work, sunday i slept for 13 hours. Not too bad. Sent from my Home Phone using Tapatalk 2 Nice my friend is a fireman and he gets alot of free time too. 12 hours of doing nothing sometimes. So did you just rip out all of the carpet so just the bare metal is showing? I was thinking of doing something like that and rubberizing the floor. |
|
| Author: | JeepMorrison [ Tue Jan 08, 2013 2:09 pm ] |
| Post subject: | Re: rubber cup holders |
Yep i ripped all my carpet out, i rerouted all my wires under the side interior molding. Theres plastic covers that hide all the wire from the factory. I took those out and put in sheet metal. Im planning on bed lining the floor. Ill take a few pics when i get back to the station. Sent from my Home Phone using Tapatalk 2 |
|
| Author: | TheBlueKJ [ Tue Jan 08, 2013 2:14 pm ] |
| Post subject: | Re: rubber cup holders |
Nice. The sheet metals a good idea can't wait to see the pics. |
|
| Author: | JeepMorrison [ Tue Jan 08, 2013 4:56 pm ] |
| Post subject: | Re: rubber cup holders |
It isnt much, i just had some sheet metal lying around the house, cut it to fit, and screwed it down. Now i just have to find rubber plugs for the drain holes, the factory ones are ment to never be pulled out. Right now i have them duct taped down. Once i find some floor plugs i will bed line it.  Sent from my Home Phone using Tapatalk 2 |
|
| Author: | TheBlueKJ [ Tue Jan 08, 2013 6:04 pm ] |
| Post subject: | Re: rubber cup holders |
Looks good! |
|
| Author: | sailwa66 [ Wed Jan 09, 2013 10:52 am ] |
| Post subject: | Re: rubber cup holders |
Most of the bed liner products are polyurethane-based, and therefore a bit flammable... just a thought.  Also, I used it on the floor of my rock buggy, and the texture is a pain in the arse to clean.In my last trail rig/daily driver, I just pulled the carpet, and used Husky liners... worked great. Might try www.mcmaster.com for the plugs. |
|
| Author: | JeepMorrison [ Wed Jan 09, 2013 11:43 am ] |
| Post subject: | Re: rubber cup holders |
sailwa66 wrote: Most of the bed liner products are polyurethane-based, and therefore a bit flammable... just a thought. Also, I used it on the floor of my rock buggy, and the texture is a pain in the arse to clean.In my last trail rig/daily driver, I just pulled the carpet, and used Husky liners... worked great. Might try http://www.mcmaster.com for the plugs. Thanks for the info. But isnt carpet a bit flammable too, lol. Im still deciding if im gonna roll it or spray it. Sent from my Home Phone using Tapatalk 2 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|