| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front end swap http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=73770 |
Page 1 of 1 |
| Author: | 4x4kingx889 [ Thu Jan 17, 2013 5:12 pm ] |
| Post subject: | Front end swap |
I asked this on other forums but never got a answer any one do a 05 renegade front end on a sport? Now I know you would need hood grille and rad support but what else? I have been comparing part number's and can not find the right answer |
|
| Author: | dgeist [ Thu Jan 17, 2013 5:55 pm ] |
| Post subject: | Re: Front end swap |
I have a feeling you're going to have to do a little trial and error here to find out the exact answer. I'd say your best bet is to find someone with a Renne and buy them a beer (or other social lubricant) and stare/compare. The CRD factor may actually play into it. I remember comparing the front clip of my CRD to a friends's gasser of the same vintage led us to believe the rad support and grille are positioned slightly differently in the CRD to allow for the intercooler. Now, if that means the hood is different I don't know, but I'll bet a measuring tape won't lie. Dan |
|
| Author: | 4x4kingx889 [ Thu Jan 17, 2013 6:03 pm ] |
| Post subject: | Re: Front end swap |
Yeah I don't know any one around here with a 05+ renegade/rocky mountain liberty...The 05+ liberty and CRD rad support have the same part number's so they should be same just can't find any info on the rennys... |
|
| Author: | MoD [ Thu Jan 17, 2013 10:46 pm ] |
| Post subject: | Re: Front end swap |
i have the 05 rocky mnt and i know someone who has an 03 front clip on an 07...if that helps |
|
| Author: | 4x4kingx889 [ Thu Jan 17, 2013 10:58 pm ] |
| Post subject: | Re: Front end swap |
MoD, Would you mind posting some pictures of under your hood and your hood latch and such? It would really help me out thanks! |
|
| Author: | MoD [ Thu Jan 17, 2013 11:05 pm ] |
| Post subject: | Re: Front end swap |
yeah i wish i could have got some pics when i had all the plastic off...but i'll see what i can do |
|
| Author: | teckman02 [ Thu Jan 17, 2013 11:09 pm ] |
| Post subject: | Re: Front end swap |
i have looked into this a few times you may just need hood grill and header panel or you could need a lot more also if you have thought about doing a 02 04 front end on a 05 07 you are going to need a lot more parts i did some test fitting a few months back ![]() ![]() ![]() 06 washer bottle ![]() 02 washer ![]() 02 grill in the back 06 grill on top |
|
| Author: | 4x4kingx889 [ Mon Jan 21, 2013 2:34 pm ] |
| Post subject: | Re: Front end swap |
Seems like a straight forward swap thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|