Needs some nice black paint and she is already to install:







It Looks like Mark has updated the design some, the frame connections do not use the side bolt and spacer like to version on his site has. It also looks like it can be installed without modifying the ends of the crossmember. I will do a writeup when it comes time to install.

At the risk of seeming to be very stupid, what is it? I can't quite make it out (probably because of my age!)

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

X2

Sent from my DROID BIONIC using Tapatalk 2

_________________
2006 Sport, GDE FT Eco Tune, Custom Trans Tune
2015 Ram 1500 Big Horn EcoDiesel, GDE Hot Tune

It's a Backbone system for the KJ. When I up my winch on the front it will allow me to think I can go places I probably shouldn't.

Thanks

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

Is that the Detours backbone? Was considering getting it.

_________________
2010 Jeep JK - Mango Tango
TeraFlex 2.5 suspension lift
Rancho RS9000Xl adjustable shocks
Tom Woods 1310 Front driveshaft
JKS Quicker front Disconnects
Synergy 1.75" Wheel spacer

Awesome!

_________________
'07 4X4 KJ - Clevis, Top Plate, Isos - Black Rock Lobos, Gorilla Lugs, Goodyear Wranglers - Front & Rear Tow Hooks - Curt Roof Basket, ARES Cross Bars - aFe Filter - Mopar Skids - CB, Phone Mount, Inverter, GoPro - Planned: Dynomax Muffler, Aftermarket Headunit, Airflow Snorkel, Lund Xtreme Floor Liners

Yup

_________________
Alec
1987 Jeep XJ
The Build Thread
Chincy 2" lift for now
31x10.50r15s
HPD30 front and D44 rear

That's the whole fun of it!

_________________
Alec
1987 Jeep XJ
The Build Thread
Chincy 2" lift for now
31x10.50r15s
HPD30 front and D44 rear

I have it installed on the front end already, now I just need to cut up the bumper. Will have a full writeup soon. This version did not require that I cut up the crossmember to fit the frame inserts in. I also did not have to remove the washer bottle from the passenger side which made things a bit easier.