Sent from my SPH-L720
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=75675 |
Page 1 of 1 |
| Author: | ckorch [ Thu Jun 20, 2013 1:22 pm ] |
| Post subject: | Front bumper |
How hard is it to get the front bumper off. I got a brush guard only to figure out my jeep has been in accident and that metal piece behind bumper is crushed. Is that hsrd to replace? Any instructions on removal? Thanks in advance Sent from my SPH-L720 using Tapatalk 2 |
|
| Author: | ckorch [ Sat Jun 22, 2013 6:56 pm ] |
| Post subject: | Re: Front bumper |
Turns out the front brace behind the bumper is welded support. do I gotta get it put on a frame machine to pull it straight. Joy joy Sent from my SPH-L720 |
|
| Author: | tommudd [ Sat Jun 22, 2013 7:29 pm ] |
| Post subject: | Re: Front bumper |
Without seeing how bad it is , then yes more than likely a frame machine will be needed. Better to just leave the Brush Guard off anyways, most cause more damage than what they are worth |
|
| Author: | MoD [ Sat Jun 22, 2013 10:07 pm ] |
| Post subject: | Re: Front bumper |
tommudd wrote: Without seeing how bad it is , then yes more than likely a frame machine will be needed. Better to just leave the Brush Guard off anyways, most cause more damage than what they are worth Yes! I had frame damage there too. Fixed it with a jeep and a tow strap and 4lo. Got in an accident and the brush guard mutiplied the damage! If I hadn't have had it I would have about 1000 in damage. Instead it was 6.3k damage. Granted I still run one but just til I get an ARB. |
|
| Author: | ckorch [ Sat Jun 22, 2013 10:24 pm ] |
| Post subject: | Re: Front bumper |
Yea im just going to use it till jan when I can afford the arb Sent from my SPH-L720 |
|
| Author: | 05renny [ Sun Jun 23, 2013 6:49 pm ] |
| Post subject: | Re: Front bumper |
tommudd wrote: Without seeing how bad it is , then yes more than likely a frame machine will be needed. Correct. It is imperative that the frame is straight. Some things you can fudge, this is not one of em. |
|
| Author: | ckorch [ Sun Jun 23, 2013 6:58 pm ] |
| Post subject: | Re: Front bumper |
Sent from my SPH-L720 |
|
| Author: | ckorch [ Sun Jun 23, 2013 6:59 pm ] |
| Post subject: | Re: Front bumper |
 Sent from my SPH-L720 |
|
| Author: | ckorch [ Sun Jun 23, 2013 7:00 pm ] |
| Post subject: | Re: Front bumper |
Best pictures I could get hopefully they can fix Tues Sent from my SPH-L720 |
|
| Author: | RED_KJ_666 [ Sat Jun 29, 2013 2:52 pm ] |
| Post subject: | Re: Front bumper |
That's just a crash bar It's not integral to the frame what so ever (When I put on my current bumper I actually cut that piece entirely out in between the frame spars.), I replaced mine after getting into an accident and having the brush guard mangle the whole front of my jeep. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|