I have an '06 Liberty CRD. I picked up a pre-04 OTIS off of Ebay. The outside temperature doesn't work, and I understand why after some internet research. I haven't cut any holes yet, I just wired them up temporarily through the OBD-II port. My thought is to install this one now, and find a compatible one later to get the outside temperature as well (none on Ebay right now). I have a couple of questions though:

1. Are the brackets the same for the OTIS and EVIC? I found the part I need to install, but I wanted to check to make sure the brackets are the same.

2. Is there an OTIS for the '06, or only the EVIC?

Thanks!