| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Finally a double din kit for KJs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=77305 |
Page 1 of 1 |
| Author: | johngr904 [ Thu Nov 07, 2013 12:48 pm ] |
| Post subject: | Finally a double din kit for KJs |
I have already cut mine out myself, but I noticed on Amazon today that someone is finally selling an aftermarket double din dash kit for the 2003-2007 Liberty. It is made by CIP and costs $135-$170 on Amazon, including a wiring harness. Price varies depending on the finish and harness type, I think. Here is a link on Amazon: http://www.amazon.com/Liberty-Aftermarket-Installation-Standard-Harness/dp/B00E8SA5P0/ref=sr_1_2?ie=UTF8&qid=1383842864&sr=8-2&keywords=2004+jeep+liberty+double+din |
|
| Author: | bieriewk [ Fri Nov 08, 2013 11:17 am ] |
| Post subject: | Re: Finally a double din kit for KJs |
Did you see there's even a Mossy Oak version? Might just be my next upgrade, I hate the factory stereo. |
|
| Author: | WHITE the civilian [ Fri Nov 08, 2013 8:39 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
Groovy! Wonder with LostJeep member is making these in their basement.. Haha I would consider buying one but I bought a new head unit and new Kicker brand speakers (which haven't blown or distorted once) in the 4 doors and dash were the first purchase for my KJ way back when. |
|
| Author: | profdlp [ Fri Nov 08, 2013 10:57 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
Hmmmm... I can see one of these in my future. Dear Santa, I have been a very good boy and... |
|
| Author: | KJScott [ Wed Nov 13, 2013 3:43 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
Drat.... I just bought a new Kenwood single DIN, and the adapter that has a small storage bin under the receiver, in August.
|
|
| Author: | mass-hole [ Thu Nov 14, 2013 6:23 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
i found them on EBAY a while back. The only thing that stinks is they dont have it in the silver limited trim(I asked). |
|
| Author: | 4x4kingx889 [ Tue Jan 21, 2014 12:25 am ] |
| Post subject: | Re: Finally a double din kit for KJs |
I will be picking this up soon |
|
| Author: | profdlp [ Tue Jan 21, 2014 12:28 am ] |
| Post subject: | Re: Finally a double din kit for KJs |
4x4kingx889 wrote: I will be picking this up soon Let me know how you like it. I am this close to pulling the trigger, but have been waiting for at least one or two reviews. |
|
| Author: | Anchorism [ Tue Jan 21, 2014 6:53 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
At 134.99??? I think id rather make my own.... face it... its not that difficult with a little crafting skills. Now if it were $30 heck yeah id jump on it! |
|
| Author: | The_dealer [ Sun Jan 26, 2014 11:24 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
I came across those on ebay a few weeks ago. I think it's not that bad of a price considering you are paying for the trim ring as well. I would like to see better quality pictures other then the ones they show. Im thinking about getting one soon to put my avh-x8600 in. If you screw up, you are looking at the cost of another trim ring, plus materials. Most guys with little/no experience are going to be hesitant to try a 2nd time if they mess up. I've seen some that looked factory, and I've seen some hack jobs as well. I'm fine paying $134.99 for convenience and clean look. Im concerned about how evenly blended they are, and the appearance of the paint they use. $134.99 for a nicely fab'd piece would be fine. Unevenly rounded edges, highs and lows, poor blending, and splotchy paint would be a different story. Anchorism: I made that mistake when I glassed my scanner and cb into the dash of a rig I had. The $30 it should have cost turned into $100, and the 3 day project turned into 2 weeks. Newbie's are gonna make mistakes. I ended up doing ALOT of sanding! I am ocd about things like that, and it took alot of work to get it perfect. It turned out great, and I got alot of compliments. If someone sold a kit to do that for $134, I would've gladly paid that... Sent from my Lumia 900 using Tapatalk |
|
| Author: | KD6ICZ [ Sun Jan 26, 2014 11:41 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
mass-hole wrote: i found them on EBAY a while back. The only thing that stinks is they dont have it in the silver limited trim(I asked). I second that. So only the Limited has the silver? I guess it could be painted but what a hassle. Sent from my SM-N900V using Tapatalk |
|
| Author: | The_dealer [ Mon Jan 27, 2014 3:24 pm ] |
| Post subject: | Re: Finally a double din kit for KJs |
I'd prefer it if my limited trim were black. Maybe I'll do something about that if I decide to go with the double din kit Sent from my Lumia 900 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|