It is currently Sat Nov 07, 2026 3:26 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 4wd not engaging
PostPosted: Thu Aug 15, 2013 1:04 am 
Offline
LOST Newbie

Joined: Sat Mar 26, 2011 7:36 pm
Posts: 28
I'm having an issue with the jeep not wanting to go into 4wd (neither hi nor lo). Just to get it out up front, I just removed the front drive shaft and replaced the cv joint boot (transfer case side). My first thoughts were that this was the culprit, but now I'm not sure. I can't think of why doing this would have caused 4 to stop working....but there may be something I'm missing.

The shifter feels as if it is not connected, as in it moves all the way from 2wd to 4lo very smoothly without giving any indication it is trying to shift into 4. None of the 4wd lights come on the dash at 4lo or 4hi positions.

If you have any advice, please let me know! Thanks in advance.


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Thu Aug 15, 2013 9:51 pm 
Offline
LOST Newbie

Joined: Sat Mar 26, 2011 7:36 pm
Posts: 28
Figured out what was wrong. The cable WAS disconnected. It seems like I'm missing some type of snap on button or something that should connect the cable to the tcase lever.

Since that piece is probably impossible to find, I might just drill the connecting piece out and stick a bolt through there.


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Thu Aug 15, 2013 10:02 pm 
Offline
LOST Junkie
User avatar

Joined: Thu Mar 14, 2013 9:19 pm
Posts: 523
There's a post here or on JeepKJcountry about a replacement - a metal axle retaining nut snap thingy from ACE Hardware.

Think it's on JeepKJ....it's a push-on replacement, no modification needed.

_________________
2005 Liberty Renegade, Bright Silver Metallic


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Thu Aug 15, 2013 10:17 pm 
Offline
LOST Junkie
User avatar

Joined: Thu Mar 14, 2013 9:19 pm
Posts: 523
I was wrong - it's here:
viewtopic.php?f=5&t=57790

Stainless steel 1/4" axle snap nut...less than $1.

_________________
2005 Liberty Renegade, Bright Silver Metallic


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Thu Aug 15, 2013 10:57 pm 
Offline
LOST Newbie

Joined: Sat Mar 26, 2011 7:36 pm
Posts: 28
Hey, sounds good to me! Thanks!


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Thu Aug 15, 2013 11:04 pm 
Offline
LOST Junkie
User avatar

Joined: Thu Mar 14, 2013 9:19 pm
Posts: 523
Glad to help ;)

_________________
2005 Liberty Renegade, Bright Silver Metallic


Top
 Profile  
 
 Post subject: Re: 4wd not engaging
PostPosted: Sat Dec 21, 2013 8:51 pm 
Offline
LOST Newbie

Joined: Fri Dec 30, 2011 11:23 am
Posts: 73
Location: North Central Maryland
I know this is an old thread but same thing happened to me a couple weeks ago and the bushing at the Tcase linkage was toast. It just fell apart. If anyone wants to get the correct bushing without buying the whole cable assembly the part linked below will fit an 02 with the 242 tase. I just put one on and it's a perfect fit. Twenty bucks seems pricy for a crappy piece of plastic but it replaces one that lasted 160k so I figured what the heck.

http://www.partswebsite.com/moparonline ... 899aa.html

_________________
02 Limited 179K (GONE)
05 Limited 71K (DD)
Lots to do... too little time.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com