LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rear Window Latch Help Needed
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=77834
Page 1 of 1

Author:  woodtick [ Thu Dec 26, 2013 9:14 pm ]
Post subject:  Rear Window Latch Help Needed

I have an issue with the rear glass on the CRD. when I pull the handle on the gate the latch for the glass does not cycle. However it does work with the fob. Any ideas?

Author:  Anchorism [ Fri Dec 27, 2013 10:15 am ]
Post subject:  Re: Rear Window Latch Help Needed

There is a microswitch assembly that needs to be replaced in the gate handle. I have the same issue with mine i just havent got around to replacing it. Make sure and test it all with a meter prior to just replacing parts, you just might be in a different situation. I found a part number but cannot find any pictures to the item. Part no:05143017AA

Author:  RockRollin [ Sat Dec 28, 2013 10:21 am ]
Post subject:  Re: Rear Window Latch Help Needed

My latch was intermittent at best, after cycling it repeatedly with some lithium lube it is working with the handle again.

Author:  TwoBobsKJ [ Sat Dec 28, 2013 9:38 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Anchorism wrote:
There is a microswitch assembly that needs to be replaced in the gate handle. I have the same issue with mine i just havent got around to replacing it. Make sure and test it all with a meter prior to just replacing parts, you just might be in a different situation. I found a part number but cannot find any pictures to the item. Part no:05143017AA


That microswitch and the wire harness that goes with it is not sold as a separate part - it is only sold new with the entire handle and latch assembly :banghead:

My local dealer sells it for $91 - but I've seen it on various Mopar online parts site for around $80. Parts guy at my local dealer said they stock the handle assemblies because they have a fair number that need replaced. He also thinks it's ridiculous that the switch can't be ordered separately. It's not ridiculous - it's stupid :furious:

Bob

Author:  steve@offroading.net [ Mon Jan 06, 2014 4:49 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Mine is doing this today, will see if I can strip it down & repair it rather than replace the handle. Will post some pictures up with what I find

Author:  samse2101 [ Mon Jan 06, 2014 4:57 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Hi,:wave:

had the same problem in spring this year...

i´ve posted something about there: http://www.jeep4fun.at/jeepforum/viewtopic.php?f=6&t=34631

Yes, i´m sorry, its all in German, but i think you understand what i mean with the pics... :wink:

This is the part i bought for replacing the OEM:

http://www.conrad.at/ce/de/product/700293/Marquardt-Subminiatur-Schnappschalter-24-VDC-Serie-1055-10580351-1-x-EinEin-Kabellitzen-IP67;jsessionid=454F55412A35B8A0093146BC262361F6.ASTPCEN17

I´m sure you will find the same in the us...

by,
samse

Author:  steve@offroading.net [ Mon Jan 06, 2014 5:11 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Thanks for that, switch isn't expensive to replace which is good, will pop the handle off tomorrow :D

Author:  steve@offroading.net [ Sat Jan 11, 2014 10:47 am ]
Post subject:  Re: Rear Window Latch Help Needed

In addition to Samse's post you can repair the switch.

If you look at his picture here
Image

You can see the contacts the wires have broken off, I just removed the top rubber cover, cleaned & resoldered the wires & replaced the rubber cover by covering the wires in glue from a hot glue gun

Image

There is a slight mistake on that picture as I didn't set the wires coming out at 90deg to the switch so I had to cut away at it to reposition the wires.
:banghead:

I didn't bother with the metal clip when refitting the switch, just glued it in, hopefully the glue will stop the moisture getting in the switch. If it fails again it is easy enough to cut the switch out, the glue isn't that strong.

Image

Author:  samse2101 [ Sat Jan 11, 2014 11:08 am ]
Post subject:  Re: Rear Window Latch Help Needed

MacGyver of UK...Image

Author:  steve@offroading.net [ Sat Jan 11, 2014 11:10 am ]
Post subject:  Re: Rear Window Latch Help Needed

too mean to spend money & watched too much A Team as a kid :lol:

Author:  TwoBobsKJ [ Sat Jan 11, 2014 9:44 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Samse and Steve, great posts from both of you. I'm going to try the "McGyver" approach first, and if that doesn't do the trick I'll buy the Marquardt micro switch and take care of it that way. With shipping the switch runs $32US, 1/3 the cost of the Chrysler handle assembly.

Two thumbs up for both of you!

Bob

Author:  sammymagoo [ Fri Jan 31, 2014 12:05 pm ]
Post subject:  Re: Rear Window Latch Help Needed

Check out the micro switches at allelectronics.com

http://www.allelectronics.com/make-a-st ... ion/1.html

Maybe one of these will fit/work. Most are priced at $1 to $2 plus shipping.

By the way, I'm not connected to allelectronics.com in any way, other than a repeat customer.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/