LOST JEEPS :: View topic - need help with shock length for lift kit

If you want OME shocks go with the 132Ls
If Ironman then their rear shocks are actually longer than the OME 132Ls
Not knowing how much lift you are going to go with hard to give you anymore advice
but either one of them will do up to 3.5 -4 inches although at 4 inches you'll have upper control arm/ spring contact even with JBA UCAs

tommudd wrote:

i was gonna do my lift off what you said you normally do,springs,2 iso's in the rear upper,front 1/4 top plate and a 3/8 clevis am i missing anything?

QuadCamd wrote:

tommudd wrote:

i was gonna do my lift off what you said you normally do,springs,2 iso's in the rear upper,front 1/4 top plate and a 3/8 clevis am i missing anything?

Pretty much it, either of the rear shocks will work great !
Good luck

Author:	QuadCamd [ Sun Jan 05, 2014 1:43 pm ]
Post subject:	need help with shock length for lift kit
im gonna be ordering my lift kit soon from jba its either gonna be either a ome or a ironman,im just not sure on what length shocks.do i get the 2.5 lift length or the 4in length?or which ome shock do i get the regular rear or the long rear

Author:	tommudd [ Sun Jan 05, 2014 1:45 pm ]
Post subject:	Re: need help with shock length for lift kit
If you want OME shocks go with the 132Ls If Ironman then their rear shocks are actually longer than the OME 132Ls Not knowing how much lift you are going to go with hard to give you anymore advice but either one of them will do up to 3.5 -4 inches although at 4 inches you'll have upper control arm/ spring contact even with JBA UCAs

Author:	QuadCamd [ Sun Jan 05, 2014 1:52 pm ]
Post subject:	Re: need help with shock length for lift kit
tommudd wrote: If you want OME shocks go with the 132Ls If Ironman then their rear shocks are actually longer than the OME 132Ls Not knowing how much lift you are going to go with hard to give you anymore advice but either one of them will do up to 3.5 -4 inches although at 4 inches you'll have upper control arm/ spring contact even with JBA UCAs i was gonna do my lift off what you said you normally do,springs,2 iso's in the rear upper,front 1/4 top plate and a 3/8 clevis am i missing anything?

Author:	tommudd [ Sun Jan 05, 2014 2:35 pm ]
Post subject:	Re: need help with shock length for lift kit
QuadCamd wrote: tommudd wrote: If you want OME shocks go with the 132Ls If Ironman then their rear shocks are actually longer than the OME 132Ls Not knowing how much lift you are going to go with hard to give you anymore advice but either one of them will do up to 3.5 -4 inches although at 4 inches you'll have upper control arm/ spring contact even with JBA UCAs i was gonna do my lift off what you said you normally do,springs,2 iso's in the rear upper,front 1/4 top plate and a 3/8 clevis am i missing anything? Pretty much it, either of the rear shocks will work great ! Good luck

Author:	QuadCamd [ Sun Jan 05, 2014 6:42 pm ]
Post subject:	Re: need help with shock length for lift kit
tommudd wrote: QuadCamd wrote: tommudd wrote: If you want OME shocks go with the 132Ls If Ironman then their rear shocks are actually longer than the OME 132Ls Not knowing how much lift you are going to go with hard to give you anymore advice but either one of them will do up to 3.5 -4 inches although at 4 inches you'll have upper control arm/ spring contact even with JBA UCAs i was gonna do my lift off what you said you normally do,springs,2 iso's in the rear upper,front 1/4 top plate and a 3/8 clevis am i missing anything? Pretty much it, either of the rear shocks will work great ! Good luck thanks tomm!do i need a new front strut or can i wait on it?

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

need help with shock length for lift kit http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=77930	Page 1 of 1

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/