LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Coilover specs...???
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=78036
Page 1 of 1

Author:  toy_vw [ Fri Jan 17, 2014 3:18 am ]
Post subject:  Coilover specs...???

Anyone know the extended and compressed length on the JBA bilstein coilover setup? or any other similar setup.

Im assuming they are using about a 400# spring with a 10" length and 2.5" I.D. was hoping someone had some insite on the shock itself.

is it possible that its a bilstein 7100 series Extended Length: 26.65 Collapsed Length:17.44

also has anyone experimented with with a 12" spring, perhaps with a lesser spring rate or greater? thanks

Author:  toy_vw [ Sun Jan 19, 2014 1:34 pm ]
Post subject:  Re: Coilover specs...???

nothing ?

Author:  tommudd [ Sun Jan 19, 2014 1:37 pm ]
Post subject:  Re: Coilover specs...???

JBA did a lot of testing with various lengths, spring rates etc. to come up with what would work well for both lift and ride/handling. He has a whole pile of test springs etc he used so of course guards the specs closely.

Author:  At The Helm [ Sun Jan 19, 2014 2:49 pm ]
Post subject:  Re: Coilover specs...???

toy_vw wrote:
Anyone know the extended and compressed length on the JBA bilstein coilover setup? or any other similar setup.

Im assuming they are using about a 400# spring with a 10" length and 2.5" I.D. was hoping someone had some insite on the shock itself.

is it possible that its a bilstein 7100 series Extended Length: 26.65 Collapsed Length:17.44

also has anyone experimented with with a 12" spring, perhaps with a lesser spring rate or greater? thanks

You're probably better off just getting an off the shelf kit rather than doing this yourself.
If you wanted to you could always measure the stock shocks and go from there. Sway-a-way has an extensive line if springs to choose from posted on their website.
Like Tom suggested JBA put a lot of time and $$$ into developing their product, I wouldn't expect to get that info easily.

Author:  toy_vw [ Sun Jan 19, 2014 9:06 pm ]
Post subject:  Re: Coilover specs...???

thanks, for the "top secret" information...my only question I really needed answered is...compressed and extended length...

Author:  tommudd [ Sun Jan 19, 2014 9:31 pm ]
Post subject:  Re: Coilover specs...???

Got mine, installed them, no way to measure compressed length or really did I see a need to
Sorry
testing time I suppose

Author:  toy_vw [ Sun Jan 19, 2014 9:52 pm ]
Post subject:  Re: Coilover specs...???

looks like...

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/