LOST JEEPS :: View topic - 16x7 or 16x8 wheels

Keep the 7" wide rims for those 235's,way to wide for a 8" rim.If you don't want the pizza cutter look get wider tires,like 255's or 265's and yep still mount on a 7" rim for best results.

I have a CRD with the stock wheels an now a 2.25" lift.
245 tires.
The tires are now rubbing slightly on the front sway bar at full lock.
According to everyone and everywhere, 245s should be OK with no rubbing, but this is not the case with mine.
Just an FYI.

Looking into BS measurements and other wheels.

Any chance of a Photo to see how it looks with 235/85R16 wheels on as it is now?
Just interested looking at some poit to upgrade to those tyre size and I can't work out in my head how it looks.
Tks,
Fil.

The soft 8 look amazing, I run 31x10.50x15 with no rubbing

Sent from my iPhone using Tapatalk

I could fit 33's on the back with no problem, but I would have to trim some in the front

Sent from my iPhone using Tapatalk

Author:	Pokoki [ Sun Jan 26, 2014 8:34 pm ]
Post subject:	16x7 or 16x8 wheels
Recently picked up an 06 Liberty CRD from a member here. Love the Jeep. It has practically brand new tires under it. Uniroyal Laredo HD/T's in 235/85r16. I don't mind the tread design at all, but they do have that pizza cutter look. Anyone running a 16x8 wheel under their Liberty? Just don't want to buy new wheels and run into rubbing issues. I'm looking at the soft 8's for wheels. Thanks guys

Author:	tjkj2002 [ Sun Jan 26, 2014 8:36 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Keep the 7" wide rims for those 235's,way to narrow for a 8" rim.If you don't want the pizza cutter look get wider tires,like 255's or 265's and yep still mount on a 7" rim for best results. EDIT#,had a brain fart and said wide instead of narrow.

Author:	Pokoki [ Sun Jan 26, 2014 8:40 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
tjkj2002 wrote: Keep the 7" wide rims for those 235's,way to wide for a 8" rim.If you don't want the pizza cutter look get wider tires,like 255's or 265's and yep still mount on a 7" rim for best results. Exactly what I was looking for. Thanks bud

Author:	tommudd [ Sun Jan 26, 2014 8:48 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Assume you are lifted so if going to Soft 8s then also 4 inches of backspacing or just the stock wheels

Author:	Pokoki [ Sun Jan 26, 2014 9:22 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
quote="tommudd"]Assume you are lifted so if going to Soft 8s then also 4 inches of backspacing or just the stock wheels[/quote Timing belt, thermostat, water pump, upgraded fuel filter housing, Hayden 2905 fan clutch, done by SirSam GDE Hot Tune Elephant hose mod and Maf were unplugged ATS stage 2 Trans and multi disc converter with Co Pilot done GDE Trans Tune Rock Father 3" lift Old Man EMU struts and shocks JBA Cut CV axle on short side JBA rear axle upper control arm adjustment bracket 235/85/r16 Laredo Tires on stock Aluminum wheels

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

16x7 or 16x8 wheels http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=78128	Page 1 of 2

Author:	Pippobug [ Tue Jan 28, 2014 7:41 am ]
Post subject:	Re: 16x7 or 16x8 wheels
Any chance of a Photo to see how it looks with 235/85R16 wheels on as it is now? Just interested looking at some poit to upgrade to those tyre size and I can't work out in my head how it looks. Tks, Fil.

Author:	DocB [ Wed Jan 29, 2014 12:15 am ]
Post subject:	Re: 16x7 or 16x8 wheels
I have a CRD with the stock wheels an now a 2.25" lift. 245 tires. The tires are now rubbing slightly on the front sway bar at full lock. According to everyone and everywhere, 245s should be OK with no rubbing, but this is not the case with mine. Just an FYI. Looking into BS measurements and other wheels.

Author:	tommudd [ Wed Jan 29, 2014 12:35 am ]
Post subject:	Re: 16x7 or 16x8 wheels
DocB wrote: I have a CRD with the stock wheels an now a 2.25" lift. 245 tires. The tires are now rubbing slightly on the front sway bar at full lock. According to everyone and everywhere, 245s should be OK with no rubbing, but this is not the case with mine. Just an FYI. Looking into BS measurements and other wheels. With stock wheels most all rub some with 245-75-16s also depends on type of tread etc

Author:	DocB [ Wed Jan 29, 2014 12:45 am ]
Post subject:	Re: 16x7 or 16x8 wheels
Tom, These are 245/70-16. Do you happen to know the BS on the CRD wheels? It was suggested that I may want to use a spacer or look into the Rubicon Moab wheels, which I have been eyeballing for a while now.

Author:	tjkj2002 [ Wed Jan 29, 2014 12:48 am ]
Post subject:	Re: 16x7 or 16x8 wheels
OEM 16x7 rims for any KJ is 5.5" of back spacing.

Author:	DocB [ Wed Jan 29, 2014 12:55 am ]
Post subject:	Re: 16x7 or 16x8 wheels
Thanks, T. So a Rubicon Moab wheel with 5.0" of BS will move the tire outboard 0.5 inches and will get the tire off the sway bar? (In your experience?)

Author:	Pokoki [ Wed Jan 29, 2014 2:17 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Pippobug wrote: Any chance of a Photo to see how it looks with 235/85R16 wheels on as it is now? Just interested looking at some poit to upgrade to those tyre size and I can't work out in my head how it looks. Tks, Fil. Absolutely. I've been traveling this week, but will get some good ones tonight.

Author:	Pararig [ Sat Feb 01, 2014 2:19 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
The soft 8 look amazing, I run 31x10.50x15 with no rubbing Sent from my iPhone using Tapatalk

Author:	BigfootHunter [ Sat Feb 01, 2014 10:36 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Lookin good, any better pics of the wheel setup? Also what lift is that?

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Pararig [ Sun Feb 02, 2014 11:24 am ]
Post subject:	Re: 16x7 or 16x8 wheels
The lift is OME Sent from my iPhone using Tapatalk

Author:	Pararig [ Sun Feb 02, 2014 11:25 am ]
Post subject:	Re: 16x7 or 16x8 wheels
Sent from my iPhone using Tapatalk

Author:	Pararig [ Sun Feb 02, 2014 11:27 am ]
Post subject:	Re: 16x7 or 16x8 wheels
Sent from my iPhone using Tapatalk

Author:	Pararig [ Sun Feb 02, 2014 11:32 am ]
Post subject:	Re: 16x7 or 16x8 wheels
I could fit 33's on the back with no problem, but I would have to trim some in the front Sent from my iPhone using Tapatalk

Author:	swiftv8 [ Sun Feb 02, 2014 4:01 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Pararig wrote: The soft 8 look amazing, I run 31x10.50x15 with no rubbing Sent from my iPhone using Tapatalk Wow, I was just looking for kj's on 15" soft 8's and 31's, very nice. You say you have no rubbing and an OME lift. Do you also have any clevis or top plates up front or extra iso's in the rear? Also did you go with 15x7 or 15x8 and what backspace. I have a set of near new Grabber A/T 2 that I would love to re-purpose on the KJ. Thanks

Author:	tommudd [ Sun Feb 02, 2014 4:18 pm ]
Post subject:	Re: 16x7 or 16x8 wheels
Pararig wrote: I could fit 33's on the back with no problem, but I would have to trim some in the front Sent from my iPhone using Tapatalk 6 inch lift, steel front diff with 4.56s or better yet 4.88s all around then 33s