Whats the maximum but still remain useable height (hub to fender) that can be done with stock a arms?

Note: A coworker just got a killer deal on a 06, complete front end redone with moog and warranty papers. So his arms are new.

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

With stock UCAs about 3 inches ( more or less) without some coil/UCA issues
so about 22 inches middle of wheel to bottom of the flare

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I'm at around 22" with my ome and 3 ring clevis, and I still have plenty of clearance. I was able to be aligned, and have at least 1/4 between the spring/uca at full droop

Sent from my SAMSUNG-SGH-I537 using Tapatalk