| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Max height with factory arms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=78430 |
Page 1 of 1 |
| Author: | JeepMorrison [ Sun Mar 02, 2014 12:04 am ] |
| Post subject: | Max height with factory arms |
Whats the maximum but still remain useable height (hub to fender) that can be done with stock a arms? Note: A coworker just got a killer deal on a 06, complete front end redone with moog and warranty papers. So his arms are new. Sent with the power of children's screams!!! |
|
| Author: | tommudd [ Sun Mar 02, 2014 12:36 am ] |
| Post subject: | Re: Max height with factory arms |
With stock UCAs about 3 inches ( more or less) without some coil/UCA issues so about 22 inches middle of wheel to bottom of the flare |
|
| Author: | The_dealer [ Sun Mar 02, 2014 9:29 am ] |
| Post subject: | Re: Max height with factory arms |
I'm at around 22" with my ome and 3 ring clevis, and I still have plenty of clearance. I was able to be aligned, and have at least 1/4 between the spring/uca at full droop Sent from my SAMSUNG-SGH-I537 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|