I'm giving my daystar lift to a friend who has an 06 liberty since I went ome. We were wondering if he can fit the daystar lift along with the JBA strut plates? I've already tried to get him to buy springs but he is hurting for money and this is what he can afford.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

Be cheaper to do a clevis lift.....FREE!

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

We already did the clevis lift. He was going to get another rear upper isolator to make it level but we weren't sure if the strut plate would work with the JBA.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

It would work in theory
But I wouldn't recommend doing it

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Can I ask why? Is it just opinion or an actual reason not to?

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

The studs on the daystar is shorter than the originals

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Plus you're adding to an already failing setup. Like putting a band aid on the bottom of your foot due to the sole of your shoes having a hole in it.
Weak springs already, Daystar speeds up the sagging, then adding more spacers will just cause more issues . With new springs with higher rates it works great, not so much on used

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited