Hi there. I have a fuel tank question hopefully some one can answer.


Basically I am installing a long range tank and need to replace the plastic fuel pickup unit in the bottom of the tank with one from my old tank.

There seems to be a metal clip on ether side of the unit but not sure how the clips are suppose to work. Anyone removed one of these before?

Thanks

Full thread is here.

http://www.ausjeepoffroad.com/forum/sho ... p?t=133603

Picture

_________________
2002 KJ Sport CRD Manual
Nudge Bar, Skid Plates
Provent, Samco
CRDSTU's lift & OME shocks, JBA A-Arms
GME UHF, AirOnBoard, Maxtrons Media

Howdy Kim - your Ausjeep thread says you found it? - not sure of the time difference.

I did the intank lift pump and I don't remember anything like that
this had pix for that install.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=37868

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Hi. Thanks for the reply, great write up on your pump install.

Yea i worked it out, have updated the thread at ajor now.

I ended up swapping the in tank module from the OEM tank into the new tank and works good now.

_________________
2002 KJ Sport CRD Manual
Nudge Bar, Skid Plates
Provent, Samco
CRDSTU's lift & OME shocks, JBA A-Arms
GME UHF, AirOnBoard, Maxtrons Media