I got Timken from Rockauto as well.
OEM vs Timken:
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What are the best front bearing assemblies to buy? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=79967 |
Page 1 of 2 |
| Author: | jrsavoie [ Fri Aug 22, 2014 5:05 pm ] |
| Post subject: | What are the best front bearing assemblies to buy? |
What are the best front bearing assemblies to buy for the 2006 Jeep Liberty CRD? I have 140,000 miles on mine. I have no current indication that wheel bearings are needed. What are the best front bearing assemblies to buy for a 2006 Jeep liberty CRD? How long do the wheel bearings usually last? I do not like to do things more often than necessary. I want a pair of hubs that will last another 140,000 miles or more. I looked on Amazon, Ebay and rockauto.com There are many choices. Which bearings have achieved good longevity? I always used GM or AC Delco hubs on my 6.5 diesels. I tried a pair of recommended MI bearings once and only got 20,000 miles on them. They were not much cheaper. Especially considering the AC Delco's came with all the studs and the rotor installed. We've got about 2 million miles on our 6.5's so I think I have some parts figured as far as what to buy and what not to buy. I'm brand new at this Jeep thing and want to stay with quality parts. Any recommendations would be greatly appreciated. Thanks |
|
| Author: | JeepMorrison [ Fri Aug 22, 2014 5:09 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Go with good quality, tikem is what I used Sent with the power of children's screams!!! |
|
| Author: | minisub [ Fri Aug 22, 2014 5:49 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I've needed to do one so far, went with a timken from rock auto. PN HA599455L I've used the timken on both the 6.5 and 6.6 with good luck in the past. (I actually think I have a NIB one for a 1/2 ton 6.5 laying around. If you need one, let me know). |
|
| Author: | Leeann [ Fri Aug 22, 2014 6:06 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I got Timken from Rockauto as well. OEM vs Timken:
|
|
| Author: | jrsavoie [ Fri Aug 22, 2014 6:35 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
minisub wrote: I've needed to do one so far, went with a timken from rock auto. PN HA599455L I've used the timken on both the 6.5 and 6.6 with good luck in the past. (I actually think I have a NIB one for a 1/2 ton 6.5 laying around. If you need one, let me know). I'll try to file that info away. Is it a 6 lug? or an 8 lug? we have both so it doesn't matter much. Just depends if I have one or the other go bad I hopefully won't need one for a while, but hope in one hand and .. What kind of mileage did everybody have when they had to switch bearings? |
|
| Author: | JeepinJarhead03 [ Fri Aug 22, 2014 7:20 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Think i was at 80k on my gasser when i put timkens on, had gone through 5 duras in less than 6oil changes at that point |
|
| Author: | Leeann [ Fri Aug 22, 2014 7:22 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I had just hit 87k miles when I replaced the pax side. Will do the driver's side in due time. |
|
| Author: | minisub [ Fri Aug 22, 2014 7:39 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I was at 98.5k. Passenger side as well. Will also address the left when it tells me to. |
|
| Author: | MilestoneMotors [ Sat Nov 29, 2014 11:54 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
SKF Bearings. This is from a Former Mopar Parts Adviser. You can get them from NAPA or Rock Auto. No other manufacturer's quality comes close. We went through several Mopar front hubs on our 07 Parts Truck, and once we put in the SKF bearings, we haven't replaced them yet. |
|
| Author: | hucorey [ Sun Nov 30, 2014 7:42 am ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
MilestoneMotors wrote: SKF Bearings. This is from a Former Mopar Parts Adviser. You can get them from NAPA or Rock Auto. No other manufacturer's quality comes close. We went through several Mopar front hubs on our 07 Parts Truck, and once we put in the SKF bearings, we haven't replaced them yet. Agreed^^^^ or Timken. Only bearing beands ill ever use for literally any application. |
|
| Author: | wheeee32 [ Sun Nov 30, 2014 12:30 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Replaced my pass. side with Timken. It's a much nicer unit than the stock one. |
|
| Author: | striperman36 [ Sun Nov 30, 2014 1:59 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
How does one get the 3 interior screws out? even with jack stands I can't get enough leverage in there to crack that screw rust |
|
| Author: | u2slow [ Sun Nov 30, 2014 2:38 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I went with cheapo unit bearings first, and one expired ~18 months later with 245/75R16E tires. Put on Timkens a couple months ago. striperman36 wrote: How does one get the 3 interior screws out? even with jack stands I can't get enough leverage in there to crack that screw rust Turn the steering for more room. I used liquid wrench and a 18" breaker bar to get them moving. |
|
| Author: | WWDiesel [ Sun Nov 30, 2014 2:43 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Turn the wheels all the way to right or left as needed to get at the bolts and apply leverage using a long breaker bar wrench with a good Torx socket.  Just had one of mine apart last week to replace the inner axle seal. They are hard but doable... 
|
|
| Author: | Leeann [ Sun Nov 30, 2014 3:55 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Yup, turn the wheels, use plenty of PB Blaster, brush the exposed ends of the bolts with a wire brush so they're clean, use a nice, long breaker bar and a good Torx socket. Mine came loose even though they'd spent 80,000 miles in Michigan. |
|
| Author: | striperman36 [ Sun Nov 30, 2014 4:02 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Also those things are T14 |
|
| Author: | CobraNutt [ Sun Nov 30, 2014 6:20 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
Time to pay Rock Auto a visit myself. Mine are just starting to howl a bit...115k miles...not bad I suppose. Sent from my mystical handheld gizmo. |
|
| Author: | -XR- [ Sun Nov 30, 2014 6:51 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
yeah the NAPA stuff is quality. The crap from the other cheaper suppliers is absolute junk. My jeep has been lifted w/245/75's for 11 years. I had the front end apart last week and the hub units are till good @190K miles. I thought they'd be some of the parts I'd replace but nope. 3 of 4 ball joints,CV shafts (w/used good stuff from stash),front diff (used),rotors and pads. I'm really surprised at the quality of the parts on my '02 (build Oct '01). |
|
| Author: | ATXKJ [ Sun Nov 30, 2014 11:54 pm ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I was trying to avoid anything 'made in China' but almost every company has manufacturing in China and they'll only say 'meets our quality specs' ended up ordering SKF from RockAuto - 'Made in Canada' - working great |
|
| Author: | bgcarl01 [ Mon Dec 01, 2014 10:30 am ] |
| Post subject: | Re: What are the best front bearing assemblies to buy? |
I just take the whole damned knuckle off. And then impact the T14 off. But hey, that's just me. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|