LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
RCV Front Axles from JBA http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=80656	Page 1 of 1

---

Author:	TheBlueKJ [ Sun Nov 16, 2014 12:21 am ]
Post subject:	RCV Front Axles from JBA
So I just noticed that JBA has the fancy RCV cv axles now. Anyone have any ideas of how high we can go now with these bad boys? It says we can get 11" of travel out of them. With the JBA coilovers and UCA we can get 9" am I correct? So in theory we could go 2" beyond what we could before with the

---

Author:	tommudd [ Sun Nov 16, 2014 2:36 am ]
Post subject:	Re: RCV Front Axles from JBA
Just to share and get some discussion going, my response from JeepKJ Originally Posted by TheBlueKJ View Post So I just noticed that JBA has the fancy RCV cv axles now. Anyone have any ideas of how high we can go now with these bad boys? It says we can get 11" of travel out of them. With the JBA coilovers and UCA we can get 9" am I correct? So in theory we could go 2" beyond what we could before with these? In theory yes, in real world there are other factors that come into play that limits the amount of travel

---

Author:	TheBlueKJ [ Sun Nov 16, 2014 11:08 am ]
Post subject:	Re: RCV Front Axles from JBA
My answer from JeepKJ as well Such as control arm limits yea. So with travel limits in mind do you think we'd be able to lift it to say 6" now? Or would the UCA be resting on the coilover even with JBA adjust-a-struts and JBA UCA? I like to post on both forums just because there are different people on each forum that could chime in with thoughts

---

Author:	Bmxer524 [ Mon Nov 17, 2014 3:53 pm ]
Post subject:	Re: RCV Front Axles from JBA
I would say the possibility of uca contact(I haven't installed mine yet, so I wouldn't know) and the tie rods. You'll start maxing angles out before you bind the CVs.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/