Finally doing TM econolift to the rear this weekend (front is already done) and getting rid of the remaining rough country parts. If I completely remove the rear sway will there be any ill effect. I do tow several times per month.

Take it off and throw it in the trash.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Being on 07 kj, will I need extended brake lines when I ditch it or will the relocation brackets be fine. Sorry for all the questions.

Make extension brackets

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

No more sway in the rear with it gone? Nothing else noticeable with it gone? I love deleting crap, but haven't messed with the stabilizer bars. How about the front?

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

Keep the front. But none of my KJs have rear sway bars. I tow all the time. I have NEVER had sway in the rear.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Mines been off for years and tow a lot and never notice any difference.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Many thanks!

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

Wow am I ever glad I came upon this tread.

I can really trash the sway bar???

Looks like I can install those wj lowers after all! Woot woot!!!

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Great, I am making the brackets tomorrow based on a how to someone has posted. Sway bar will be gone saturday. Have you noticed better offroad articulation without it or is it just pretty much take it or leave sort of thing.
................now if I can just remember where I found that how to on the those extension brackets.

Try that with the sway bar on.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

I got 32 completely under the rocker line with my sway on.. Pic to follow in the am.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

:p

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Oh wait I don't have a rear swaybar either

Is this a rear flex competition now? hahaha

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker

First one I came across


and well.......same spot

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Lol. You guys are an alright bunch

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Yeah JKU's just seem to not flex................

Okay...you win...a 35" sitting well below the body line is impressive...

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker

Poor JKU didn't know what it wasn't capable of hahaha

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker