Need to wire 4 100w KC daylighters on the roof. I want this to be a clean install. Thinking about running the wires through roof up under the plastic at the front of the roof rail. Need to run 4 10 gauge wires. Has anyone gone this rout with wiring? If so could you post some pice of the roof penetration. Or pics other clean ways to run the wire.

Look at how boat owners run wires through , works great
Why 4 wires? 4 sets of lights?
I ran mine ( 4 lights) on two switches , grounded at the roof

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

1 switch, 2 relays. Supply and return for 2 circuits. Going to ground to underside of roof supports under headliner. Can't realy ground to the rack as I still have the stock rails. Unless of course I ground the rack to the vehicle first.

I ran my hot wire 10ga up the plastic that runs into the channel on top, and out through a hole i drilled in the support. Grounded on one of the bolts that are in the supports

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)