LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Lift kit question
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=82154		 Page 1 of 1
Author:  Buitragokev [ Sun May 17, 2015 9:32 pm ]
Post subject:  Lift kit question
Is the rusty 2.5 lift kit any good? Wanting to know so i can orden it tonight
Author:  tommudd [ Sun May 17, 2015 9:58 pm ]
Post subject:  Re: Lift kit question
Buitragokev wrote:
Is the rusty 2.5 lift kit any good? Wanting to know so i can orden it tonight


NO
springs are rated same as stock , rear shocks last a few months
springs will sag back to stock height in 8-10,000 miles

Ironman or OME only if looking for full spring lifts
Author:  Buitragokev [ Sun May 17, 2015 10:03 pm ]
Post subject:  Re: Lift kit question
How much do tose lift kits usually run for?
Author:  tommudd [ Sun May 17, 2015 11:10 pm ]
Post subject:  Re: Lift kit question
Buitragokev wrote:
How much do tose lift kits usually run for?



http://www.jeepinbyal.com for OME ( 835 gives you 2.5 inches of lift can be made more) and Ironman ( 813 gives you 2.25 inches of lift can be made more)
http://www.boulderbars.com for a Frankenlift using OME parts

Rustys and Skyjackers both have spring rates same as stock so no to them
Author:  WhitbyKJ [ Mon May 18, 2015 12:42 am ]
Post subject:  Re: Lift kit question
Like tom said, spring kits are better.

I mixed and matched, ironman springs, trim spacer, 1/4 plate, rustys strut, and in the rear I got dakota shocks and jba 4 inch springs. There is still room to jack it up more, but remember.. It's your kj, lift it to 2.5 inches anyway you want, go past that and you need heavier modifications.

Jba arms are a must if you go past 3 ~ 3.5 otherwise your gonna have spring contact.

Use the search function babe :) there has been some really good tech posted lately, with pictures and videos even (staring me lol)
Author:  Buitragokev [ Mon May 18, 2015 1:36 am ]
Post subject:  Re: Lift kit question
Whats the difference between the HD lift and the regular?
Author:  Buitragokev [ Mon May 18, 2015 1:38 am ]
Post subject:  Re: Lift kit question
Nvm. The OME says it's a 1.5
Author:  Bmxer524 [ Mon May 18, 2015 2:31 am ]
Post subject:  Re: Lift kit question
OME is 2.5". It says that because of Australian regulations.
Author:  Buitragokev [ Mon May 18, 2015 2:36 am ]
Post subject:  Re: Lift kit question
Okay so the 1.5 is a 2.5? What are the biggest a tires that will fit?
Author:  WhitbyKJ [ Mon May 18, 2015 6:11 am ]
Post subject:  Re: Lift kit question
245/75/16... Although I managed a 265/75/16 somehow and nobody understood how it happened and to this day neither do I... It was a freak accident. My springs weren't lifting they way they were supposed to and I only had 2 inches of lift.
Author:  tommudd [ Mon May 18, 2015 7:46 am ]
Post subject:  Re: Lift kit question
Buitragokev wrote:
Okay so the 1.5 is a 2.5? What are the biggest a tires that will fit?


OME 927 / 948 combo will give you 2.5 inches of real lift
run 245-75-16s , won't have to regear as you would with larger
Author:  Buitragokev [ Mon May 18, 2015 11:45 am ]
Post subject:  Re: Lift kit question
Any way I can get the ome lift cheaper?
Author:  twowings [ Mon May 18, 2015 1:10 pm ]
Post subject:  Re: Lift kit question
Buitragokev wrote:
Any way I can get the ome lift cheaper?


You can get it with free shipping from ok4wd.com but customer service is NOT on par with jeepinbyal....
Author:  tommudd [ Mon May 18, 2015 1:23 pm ]
Post subject:  Re: Lift kit question
OME prices are pretty much set by ARB ( parent company of OME)
So you're pretty much going to be paying the same price everywhere
Customer Service is what puts a few at the top as far as when and where you buy
Jeppinbyal and AllJs are a close match as far as customer service before and after the sale
Author:  Buitragokev [ Tue May 19, 2015 1:43 am ]
Post subject:  Re: Lift kit question
Thank you I have decided on the OME
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/