| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lock Confirmation Flash isn't working after break-in http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=82645 |
Page 1 of 1 |
| Author: | usa591 [ Mon Jul 20, 2015 1:11 pm ] |
| Post subject: | Lock Confirmation Flash isn't working after break-in |
Hey Team, A few weeks ago my Liberty was broken into via smashing the left rear window. The window has been fixed, but ever since then whenever I lock/unlock the vehicle, I don't get a confirmation flash via the front/rear blinkers like I did before. Everything else is working fine, electrically. Any ideas? |
|
| Author: | fratichelli [ Tue Dec 22, 2015 9:35 am ] |
| Post subject: | Re: Lock Confirmation Flash isn't working after break-in |
This works for KK's I don't know if it works for KJ's edit: page 22 in the manual To Turn Off “Flash Lights With Lock” NOTE: The Flash Lights With Lock feature can be turned on or off by performing the following steps: 1. Press the “Unlock” button for 4 to 10 seconds. 2. While the “Unlock” button is pressed , (after 4 seconds) press the “Lock” button. Release both buttons. 3.Test the flash lamps with LOCK feature while outside of the vehicle, by pressing the “Lock” button on the key fob with the ignition in the LOCK position, and the key removed. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|