| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Just finished my custom front bumper. What do you guys think http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=82880 |
Page 1 of 2 |
| Author: | JdubKJ03 [ Wed Aug 19, 2015 2:57 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Good job, clean. |
|
| Author: | JeepMorrison [ Wed Aug 19, 2015 3:16 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Looks good, dont snatch on those loops, they are for static loads only. |
|
| Author: | Blueoval_boy_64 [ Wed Aug 19, 2015 3:57 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
This bumper is basically all show. I hated the stock bumper and turn signals, so I had to ditch it. Making room for some 285s! |
|
| Author: | tommudd [ Wed Aug 19, 2015 9:41 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Blueoval_boy_64 wrote: This bumper is basically all show. I hated the stock bumper and turn signals, so I had to ditch it. Making room for some 285s! Someone going way tall and steel front diff with 4.88s then ?? |
|
| Author: | JeepMorrison [ Wed Aug 19, 2015 10:13 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
tommudd wrote: Blueoval_boy_64 wrote: This bumper is basically all show. I hated the stock bumper and turn signals, so I had to ditch it. Making room for some 285s! Someone going way tall and steel front diff with 4.88s then ?? Tom.....#mallcrawlin |
|
| Author: | deeprecon1 [ Wed Aug 19, 2015 10:47 pm ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Very nice build, did you get a weight before you installed? I am at the beginning stages of building mine with a removable front hang glider rack. I am not going for armor. Looks and the ability to support 100lbs at the most with three gliders on the rack. Man these little tractors are time and money pits ....
|
|
| Author: | Blueoval_boy_64 [ Thu Aug 20, 2015 12:04 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
4x4kayak2112 wrote: tommudd wrote: Blueoval_boy_64 wrote: This bumper is basically all show. I hated the stock bumper and turn signals, so I had to ditch it. Making room for some 285s! Someone going way tall and steel front diff with 4.88s then ?? Tom.....#mallcrawlin Lol, I don't think you can mall crawl in a kj! This was just something to clear that nice FREE 285s an make it look more like a guy's Jeep instead of Barbies! This thing will see light trails and snow. I have bigger toys when I want to go have fun! |
|
| Author: | tommudd [ Thu Aug 20, 2015 12:08 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Lol, I don't think you can mall crawl in a kj! This was just something to clear that nice FREE 285s an make it look more like a guy's Jeep instead of Barbies! This thing will see light trails and snow. I have bigger toys when I want to go have fun![/quote] Free or not still will need way lower gears to have any power or be able to use over drive at all |
|
| Author: | Blueoval_boy_64 [ Thu Aug 20, 2015 12:13 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Oh nice. I used factory JK lights. As you can tell I'm new to KJs, but I'm loving the CRD |
|
| Author: | At The Helm [ Thu Aug 20, 2015 12:50 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Hell yeah! good job on that bumper...nice to see a change in styling. The only thing I would've done different is the recovery part.. No matter good your welds are I just don't trust those weld on d-rings. |
|
| Author: | Arkie [ Thu Aug 20, 2015 7:43 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
At The Helm wrote: Hell yeah! good job on that bumper...nice to see a change in styling. The only thing I would've done different is the recovery part.. No matter good your welds are I just don't trust those weld on d-rings. Good to see an "old hand" with something other than negative to say. I think it looks great! Bob |
|
| Author: | tommudd [ Thu Aug 20, 2015 9:22 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Arkie wrote: At The Helm wrote: Hell yeah! good job on that bumper...nice to see a change in styling. The only thing I would've done different is the recovery part.. No matter good your welds are I just don't trust those weld on d-rings. Good to see an "old hand" with something other than negative to say. I think it looks great! Bob Just looked through 3 times, nothing negative I can see posted all either positive or trying to offer help or comments ???? |
|
| Author: | Arkie [ Thu Aug 20, 2015 10:05 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Just seems an occasional "ATTABOY" might beat constructive criticism? Bob |
|
| Author: | barley00 [ Fri Aug 21, 2015 6:50 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Like!! |
|
| Author: | Blueoval_boy_64 [ Sat Aug 22, 2015 12:59 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
285s!! Not bad for only 3" of lift.
|
|
| Author: | JeepMorrison [ Sat Aug 22, 2015 1:33 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
I wanna see it turned and flexed out. My 32.2" tires rubbed a hair when I was at 3.75", went up to 4.25" and I could easily fit 33s with minor rub. But now im going 5.25" lift so 33s are no problem. Looks good, like the different bumper style you have. You gonna regear? |
|
| Author: | Blueoval_boy_64 [ Sat Aug 22, 2015 11:27 am ] |
| Post subject: | Re: Just finished my custom front bumper. What do you guys t |
Not sure yet if I'll regear. The other 4 wheels get here Monday, so I'll get some better pics of it then. They rubbed badly when I first test fit them, but after a bit of trimming and coaxing with the BFH, the shouldn't rub for normal driving. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|