I'm looking for front struts for my 06 crd with arb steel bar and winch and 3" lift. I'm trying to find a long travel heavy duty adjustable front strut. Does anyone make a decent one or is old man emu the best way to go?

JBA coilovers are adjustable.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Yes JBA is the best

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

There are no bolt in long travel components for us yet

JBA adjstables are longer than OME/ Ironman etc
Of course you are limited anyways with CVs/ tie rods/ etc etc etc

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

........yet

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Yes..... Yet.

Although, wheels are turning

I've imagined, instigated and even (recently) invested in some new hardware that should increase front end travel, and safety (but not widen the stance).. No telling if it will work yet. First, I'm finishing the steel diff, then comes the suspension.

My ironman coils have officially sagged to the point of useless, lol

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Cool.... Looking forward to it.

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.

Imagine, we can't just drop the diff straight down... No way, it's a low pinion diff and the tail cone would hit the cradle... So we have to drop the whole cradle... Or do we????

If the axle tubes (openings) are at the front of the diff, what's stopping us from just tipping the diff forward (lowering the tubes) an inch or so??? Custom bracketry. What's my specialty? Brackets.

Tipping would offset centreline of the driveline, but that can be corrected with z dimension movement. I think, in theory this would also allow the driveshaft to power the pinion in a straight line. Like the front cv wouldn't work as hard and the rear cv would stay at the same angle.

This tipping idea has nothing to do with the "safety" mentioned above, that's a different story.

Again, just a theory I am working on.

Love

your neighbourhood hack job just kiddi g

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

I'll be expanding my track width for my LT ifs

Please hold all questions until the end of the presentation




Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

:s

.... What truck is that? I see a body mount!!

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

the limit is not the suspension

it's the CV joint

if you fix the CV joint there are options

if don't fix the CV joint - it doesn't matter.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Cv axle is a pretty easy fix

Yep. Take it out. Easy fix. Lol

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Oh boy.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Just tip the darn diff forwards/downwards

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Or, shim the Cradle down half an inch and the rack up half and inch.. Get an alignment and call it a day..

If 3.5" is the limit for the cvs and you wanna go 4", half inch of shim should fix that. Can't speak for ubj contact, unless you have al's a arms, and your feeling risky lol, mount the bj on the underside of the arm... Problem solved.

Sorry for my brevity, short on time

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --