While looking for new motor mounts for my 2005 Liberty I found what appears to be the round rubber mount piece with the bolt hole in the center . It doesn't have the metal around it that bolts to the engine . Anyone ever replace the rubber part in the existing mount ?

I think your referring to the bushing.

I wouldn't for a second try to press out the bushings.. Pain in the booty!!

Just buy the bolt on style.

But if you fancy a challenge.. Give her hell

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

Yep , I ordered the complete mounts . I also contacted the seller of the inserts/bushings & was told they are a pressed in fit . Having pressed bushings into suspension & other parts I can see that these might be ok . Heck of a lot less expensive .