| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need to lift my 02 Liberty http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=83895 |
Page 1 of 1 |
| Author: | tjkj2002 [ Thu Jan 21, 2016 8:00 pm ] |
| Post subject: | Re: need to lift my 02 Liberty |
NewbiefromMars wrote: Hey!!! Im new but lurked a while. I have a few questions. 1. Whats a good size lift 2. Long travel like the Toyotas 3. I wanna fit 35s maybe 37s. Seen it on instagram looked good No long travel IFS options besides going SFA. No 34"+ tires unless you go SFA,33's require 6"+ lift and JBA steel front diff to gear correctly. Your stuck with 2"-4" and 245/75R16's if your not willing to spend $10,000+ to do it right(key words "do it right") and run 34"+ tires. |
|
| Author: | tommudd [ Thu Jan 21, 2016 8:56 pm ] |
| Post subject: | Re: need to lift my 02 Liberty |
For your wifes or yours ? |
|
| Author: | Function > Form [ Fri Jan 22, 2016 11:25 am ] |
| Post subject: | Re: need to lift my 02 Liberty |
I run 32" skinnies 235.85.16 on stock gears. Maybe because they are skinny, I don't really have *major* issues with power, or transmission heat issues. I also do not drive much, recommend you regear to at least 4.10 for 32s if you are DDing it. On the hwy, it hunts gears a bit with OD on when on a slight grade. Will likely be fine for most trails imho - 4lo has plenty to get you going unless you are hella loaded overland style with your family and dogs too. I am lifted on OME HD front/rear with front ironman coilover shocks and OME rears. Front also has a 3 conduit clevis lift and JBA spacer plate. Rear also has a total of three isolators. Lift only sits around 22" hub to fender (3" over showroom stock of ~19"). You also need the JBA arms for best droop clearance (stocker hits the spring). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|