Noticed a slight lean in the rear... LR 20 3/4, RR 21 3/4 (center of hub to bottom of flare). I have the OME HD lift in the rear with two isos. Rear has a RL bumper w/carriers, RL gas tank skid, and a 16x8 KMC Enduro w/265 75 Duratrac (spare). Could the spare be causing me to lose an inch on that side? What else could cause me to lose a inch on that side? New springs and socks were installed back in August 2014.

_________________
Recon bumper w/ XRC8000 winch, RL Super Skinks, Custom RL HD Komodo rear
Skid Row engine and trans skids, RL gas tank skid, Crane diff cover
Defender rack w/ KC Slimlites, Smitybilt I Rack system
Frankenlift II Premium (CRD Upgrade)+1 iso, Jeepin by Al 4.5 A arms
16x8 KMC Enduro XDs, 265/75 16 Goodyear Duratracs
Air Flow snorkel

I experienced the same thing with my OME 948s which are only rated at 200 lbs/in which are 50lbs over the stock spring rate. The OME spring wasnt designed to handle that kind of weight for a long time. Springs sag. But I know others will say im wrong. Maybe even check out your isolators, a few I have seen got good and crunched down over the years.

So what I have found that works are a stiffer rear spring thats custom made with a higher spring rate. Tested them out for two years in secret on my two KJs and now about 10 KJ/KKs have them, everyone has been pleased with them. Unfortunately thats all the information that I can give out due to the lostjeeps policy about selling items on here and I'm not willing to give up the info for free honestly, because I have been screwed over by some members on here. You want a "vertern lostjeeper" and their opinion on it, ask ATH. If you want more information on the springs PM and we can discuss where you can get more information.

(Note to Admins: this is in no way items that I personally make or even sell for a profit. I just have someone make them for members, all I do is call a order in and they get shipped out, but im sure thats violation of some rule on here)

_________________
02 Blackwater Edition. But honestly it doesn't matter what it has installed on it

id say half an inch is pretty normal, if its smooshed through the isos more on one side than the other then id expect another up to half an inch

i think mine was about 2/3" different completly unloaded of cargo with my jba25s but my spare tire was and is still on the center

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632