I'm posting this question in the CRD section in hopes that you guys have had this happen and it may be a CRD related issue.

1. All fuses check OK
2. Switch is OK in that the third tail light over the spare tire works
3. Both LH & RH bulbs burn when removed from the socket and then bench tested.

I say the switch is OK from the standpoint that the third light is burning. Maybe the switch send current to the third light and LH & RH light in a different circuit?

Any ideas?

Thanks,

Tom

_________________
2005 Jeep Liberty CRD Limited
Build Date May '05
OME lift kit
Samco hoses
Weeks Stage 1
PMF EGR plug kit
ARP Stud
Cracked CAC repaired with epoxy filler