| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Junkyard wheels for lifted KJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=85624 |
Page 1 of 1 |
| Author: | Polak [ Sun Nov 20, 2016 10:33 pm ] |
| Post subject: | Junkyard wheels for lifted KJ |
Piecing together a lift and I'm wondering if there are any known 16" wheels out there that fit the 5x4.5 bolt pattern that are 7" with 4" backspace. I could use spacers on factory wheels or buy new cragers, but what fun is that? Let me know what you know! Thanks Sent from my SM-G920V using Tapatalk |
|
| Author: | tommudd [ Mon Nov 21, 2016 12:57 am ] |
| Post subject: | Re: Junkyard wheels for lifted KJ |
Polak wrote: Piecing together a lift and I'm wondering if there are any known 16" wheels out there that fit the 5x4.5 bolt pattern that are 7" with 4" backspace. I could use spacers on factory wheels or buy new cragers, but what fun is that? Let me know what you know! Thanks Sent from my SM-G920V using Tapatalk Not with 4 inches of backspacing Some Ford Ranger and Explorer have 4.5 inches of backspacing but center hole is only 70.3 -vs- Jeeps 71.6 What lift are you thinking of using? |
|
| Author: | Polak [ Mon Nov 21, 2016 12:55 pm ] |
| Post subject: | Re: Junkyard wheels for lifted KJ |
Tom, Thanks for the Info. Originally I was planning on the 3.5” Econolift for my early 05 CRD. But, I got a great deal on parts for I’ll call the fakenlift. It’s a mixture of the Franken and JBA Econolift. Here’s what I have either in house or on order: JBA 4.5 A-arms with 20k on them Brand New OME 90009 Struts JBA top Plates with 20k on them Terraflex Bump Stops with 20k on them JBA rear bump Stops with 20k on them OME 948’s with 20k on them 2 extra ISO’s for the rear (3 total) Brand new Monroe 58649’s load leveler rear shocks. Used Tri-Link Extension Remaining to purchase: OME 790 front coils Any washers/shims needed for Monroe shocks Labor for putting the 790’s on their struts. Conduit Nuts if it’s got too much rake (I want it to be a little raked) Brake line brackets if needed Back on topic, I guess I’ll watch on black Friday for some discounts on Cragers. Seems like a 7” wheel with 4” backspace is the favorite for lifted Libby’s. |
|
| Author: | Polak [ Fri Dec 09, 2016 12:20 pm ] |
| Post subject: | Re: Junkyard wheels for lifted KJ |
Hey Tom, Are TJ wheels like Moabs hub centric on KJ's? I'm about to pull the trigger on some Tomb Raider Alcoa 16x8 Forged alloys. They're 4.75 BS btw. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|