LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JBA OME Lift
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=85819
Page 1 of 1

Author:  ekj [ Tue Dec 20, 2016 12:19 pm ]
Post subject:  JBA OME Lift

Howdy! Looking at this: http://jeepinbyal.com/liberty-2002-2007-kj/lift-kits-jeep-liberty/ome-1-50-lift-kit-kj.html

Front: OME 2927 springs, 90009 shocks
Rear: OME 2948 springs, 60069 shocks

I don't believe I need bump stops. This is listed as a 1.5" lift. I'm only looking to upgrade the old, sagging suspension.

Does this makes sense? Is there anything else I need to consider?

Thanks.

Author:  tommudd [ Tue Dec 20, 2016 7:31 pm ]
Post subject:  Re: JBA OME Lift

ekj wrote:
Howdy! Looking at this: http://jeepinbyal.com/liberty-2002-2007-kj/lift-kits-jeep-liberty/ome-1-50-lift-kit-kj.html

Front: OME 2927 springs, 90009 shocks
Rear: OME 2948 springs, 60069 shocks

I don't believe I need bump stops. This is listed as a 1.5" lift. I'm only looking to upgrade the old, sagging suspension.

Does this makes sense? Is there anything else I need to consider?

Thanks.


No you need rear and front bumpstops
Front JBA has , rear you can use two hockey pucks per side bolted down to the lower spring pad
The 927/948 combo gives you 2.5 inches not 1.5
those rear shocks are stock length and are not long enough, OME stopped making the longer rear shocks for use when lifted

Author:  ekj [ Tue Dec 20, 2016 9:19 pm ]
Post subject:  Re: JBA OME Lift

Thank you, sir. Interesting that JBA offers that combination of springs and shocks.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/