LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

transfercase swap
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=86885		 Page 1 of 1
Author:  Mike_nvt [ Mon Jul 17, 2017 4:45 pm ]
Post subject:  transfercase swap
Hello everybody

I have a question. I wanne convert my 2002 jeep liberty.

Ihave dana 44 axles with arb's and 4.56R&P. Only problem is the front axle is a passenger side drop. So i am looking to install a transfercase that has a passenger side output. Is it possible to install a dana 300 to my 45RFE transmission?

Kind regards
Mike
Author:  iceaxe1967 [ Tue Aug 29, 2017 12:34 pm ]
Post subject:  Re: transfercase swap
Try reaching out to Novak or Advance Adapters. I did not see your transamission listed but it should have the 6 bolt circular pattern for a New Process transfer case and normally to run the dana 300 that has a 6 bolt pattern also, you need a clocking ring.

See this for example.
https://www.novak-adapt.com/catalog/ada ... o/kit-153/
Author:  tommudd [ Tue Aug 29, 2017 4:34 pm ]
Post subject:  Re: transfercase swap
Go back and do a left side drop, everything will be so much easier
Author:  u2slow [ Fri Sep 08, 2017 12:12 am ]
Post subject:  Re: transfercase swap
Mike_nvt wrote:
I have a question. I wanne convert my 2002 jeep liberty.

Ihave dana 44 axles with arb's and 4.56R&P. Only problem is the front axle is a passenger side drop. So i am looking to install a transfercase that has a passenger side output. Is it possible to install a dana 300 to my 45RFE transmission?


Suspension plans? 8)

A Dodge NP241 (early 90's; 23-spline; fixed-yoke) is another decent passenger-drop possibility.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/