LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

The house of lift.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=8739		 Page 1 of 2
Author:  Mutt [ Sat May 20, 2006 4:08 pm ]
Post subject:  The house of lift.
SkiDog (Mike) came down to my house today from Norfolk and we installed a Frankenlift on his '05 Renegade. The lift went really well and we now have it down to a science, using a ratchet strap to line up the clevis is the only way to go. No cussing or hair pulling today and it only took four hours to do the complete install.

Before:
Image

Here's Mike with his KJ, we're halfway done:
Image

Mike tightening the rear lugs on his 100% Frankenlifted Liberty:
Image

A little side by side comparison:
Image

Who is next? 8)
Author:  uvalax236 [ Sat May 20, 2006 4:42 pm ]
Post subject: 
Well if you would like to come up and help Dog_Party and myself install his Daystar Spacer lift you can.
Author:  Mutt [ Sat May 20, 2006 4:44 pm ]
Post subject: 
Up where and when?
Author:  SKIDOG [ Sat May 20, 2006 8:59 pm ]
Post subject: 
DUDE you got the pics up before I got home.. They look great. There is absolutely no comparison to the ride after installing, very smooth, no pulling to either side stays right in the middle of the road. Thanks for the help.(you did most of the wrenching) IT DEFINITELY IS A TWO MAN JOB !!!!!
Let me add. IF YOU HAVE A FRIEND help it makes the job go a great deal easier..
Author:  jeepmed [ Sun May 21, 2006 10:06 am ]
Post subject: 
Looks great. Now Tires.
Author:  benmar2000 [ Sun May 21, 2006 11:54 am ]
Post subject: 
That is awesome..

Mutt - East Coast Frankinlift Install Master!! LOL.. I can't wait to get mine ordered.. Come on JULY!!!

Ben
Author:  uvalax236 [ Sun May 21, 2006 12:17 pm ]
Post subject: 
Mutt: Virginia Beach, Va on the 3rd of June.
Author:  tommudd [ Sun May 21, 2006 1:25 pm ]
Post subject: 
SKIDOG said it was a two man job, well just so somebody does not get the wrong idea and thinks they can not do it by their self, they can. I did mine by myself in less than 5 hours and that was cleaning up afterwards. Not to start anything but I had seen on here before how long it took, how hard it was etc.
Not trying to take anything away from anyone but just letting those who may be thinking of trying not to afraid to tackle it themselves.

By the way it looks great!! I can not believe how much better they look after a lift!
Author:  TurboC5 [ Sun May 21, 2006 4:47 pm ]
Post subject: 
I'm going to be lifting mine next week. Got any tips before I get started?
Author:  Jeepjeepster [ Sun May 21, 2006 4:58 pm ]
Post subject: 
tommudd wrote:
SKIDOG said it was a two man job, well just so somebody does not get the wrong idea and thinks they can not do it by their self, they can. I did mine by myself in less than 5 hours and that was cleaning up afterwards. Not to start anything but I had seen on here before how long it took, how hard it was etc.
Not trying to take anything away from anyone but just letting those who may be thinking of trying not to afraid to tackle it themselves.

By the way it looks great!! I can not believe how much better they look after a lift!


I did my OME lift be myself, but I didnt have to fight the cleavis to get it back in.
Author:  Infrared06 [ Sun May 21, 2006 7:32 pm ]
Post subject: 
I am ordering my Fankinlift Monday if you have any pointers or tips I would appreciate the info!
Author:  Mutt [ Sun May 21, 2006 11:49 pm ]
Post subject: 
You guys that did it "all" on your own must have a third arm growing out of your head.
Image
We are not worthy of your superior mechanical ability.
Author:  tommudd [ Mon May 22, 2006 5:13 pm ]
Post subject: 
Did not want to say that I was or anyone else that does it on there own is better , just that if you have a little bit of mechanical knowledge you can do it on your own. Do I wish I had help a couple of times ....SURE! But I had to do it cause no one else in this town has ever seen a lifted KJ, plus just moved up here a few months ago so no new friends, off subject I know .
Also had it a little easier because I went with just the OME springs/ Rancho struts and the conduit washers (5 of them each side)
I just think sometimes some get scared away from trying it themselves, then spend good money paying a shop to do it for them.
Author:  VGG@LOSTKJ [ Tue May 23, 2006 3:15 am ]
Post subject:  HELP! FROM ITALY
yes ... now your car looks great !

yes ... now you need a pair of new tires ! :D

can you please write me a quick link to an online shop that sells online the frankenlift like yours?

thanks from an italian Jeeper !
Author:  CaKJFreedom [ Tue May 23, 2006 6:28 am ]
Post subject: 
Wow, Italy! This is the only place that sells the Frankenlift (since they're the ones that made it) BoulderBars.com
Author:  VGG@LOSTKJ [ Tue May 23, 2006 10:25 am ]
Post subject: 
I don't really think they are italians ... hi hi hi with a car like that they could be in an italian jail :D
Image
Author:  gregerm [ Wed May 24, 2006 2:00 pm ]
Post subject: 
skidog what kind of tires are those? And the size of your rims?
Author:  SKIDOG [ Wed May 24, 2006 2:11 pm ]
Post subject: 
Those would be the stock 235/70/r16 tires and wheels. Why you have something in mind???? :shock:



By the way mine is the blue one on the right...
Author:  gregerm [ Wed May 24, 2006 3:02 pm ]
Post subject: 
Sorry I assumed yours was the silver one. because mutt posted the pics What about those on the silver kj
Author:  dog_party [ Wed May 24, 2006 3:06 pm ]
Post subject: 
Now that's a couple good lookin' KJs right there. Nice job guys!

Mutt and SkiDog - Richard (UVALAX) and Mike (Ugg) are coming over to help me install my Daystar lift, Mopar skids, and (time permitting) front receiver hitch on Saturday June 3rd. I don't have a garage or any amazing tool collection, just a relatively flat driveway and enough tools to get the job done. But you're more than welcome to come over and help if you want. The sooner we get done, the sooner we can walk across the street and get drunk on the bayside beach. If we can swarm the dang thing, it'll be more of a beach party than an install party and that'd be okay with me. 8) Let me know if you're interested in coming over and I'll PM you details.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/