LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Poison Spider Mesa in a KJ?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=8882
Page 1 of 1

Author:  moose [ Wed May 24, 2006 3:28 pm ]
Post subject:  Poison Spider Mesa in a KJ?

A friend of mine wants me to go with him to Moab in 2 weeks. He's going to rent a TJ in town and do Elephant Hill, White Rim Trail & Poison Spider Mesa. We both figure my stock Renegade could do the White Rim w/o a problem, and Elephant Hill with care; however he feels that Poison Spidr Mesa would cause major damage w/o an upgrade. Has anyone here at LOST been over PSM? In a KJ? Any opinions about how a stock Renegade would do?

Thanks in advance.

Author:  lilmatty [ Wed May 24, 2006 3:40 pm ]
Post subject: 

KJs have run PSM many times. Take a look at the latest shots:
http://townsendsociety.org/moab/MoabTuesday.htm

Recommend skids, including tranny, limited slip diff. Expect your stock rock rails to get mashed. A lift would help but if your friends have tow straps that'll get you though any issues. Guys have run it with stock tires.

Author:  JJsTJ [ Wed May 24, 2006 4:35 pm ]
Post subject: 

There are a few spots that you will really be beating up your belly w/out a lift and larger tires and All skids would be mandatory underneath a stocker for sure. You could always ride along w/ him if possible. Great trail to see even from the passenger seat.

Author:  KJ-BOL [ Wed May 24, 2006 4:41 pm ]
Post subject: 

that place is where parts of my "round tube" rock rails became "square" - :)

Author:  moose [ Wed May 24, 2006 4:47 pm ]
Post subject: 

OK. I have 4 factory skids from the off-road group, and I'm not sure if I've got the Limited slip or not. So unless I stop by Rock Lizard's on the way out, I'll just park her that day.

Thanks guys.

Author:  krazz1e [ Wed May 24, 2006 5:23 pm ]
Post subject: 

take the bypasses(on the optional stuff, like wedgy and at the end of the waterfall-towards the top), if you got full skids underneath and stock rock rails go for it. expect to bang them up and MAYBE need a tug in 1 spot.

If you are unexperienced then this might be a little hard as it can be techinical... but yeah it can be done.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/