| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rebuilding/improving np 242 select trac http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=91798 |
Page 1 of 1 |
| Author: | mercdude [ Mon Jan 11, 2021 2:17 am ] |
| Post subject: | Rebuilding/improving np 242 select trac |
Does anyone know if it’s possible to upgrade the select trac tc? Sent from my iPhone using Tapatalk |
|
| Author: | PZKW108 [ Wed Jan 13, 2021 10:43 pm ] |
| Post subject: | Re: Rebuilding/improving np 242 select trac |
I'm wondering what you don't like about the NV242 Select-Trac ? |
|
| Author: | mercdude [ Wed Jan 13, 2021 10:56 pm ] |
| Post subject: | Re: Rebuilding/improving np 242 select trac |
LOVE the select trac, one of the best features of my kJ. just interested in making it stronger if possible Sent from my iPhone using Tapatalk |
|
| Author: | jeeptorino68 [ Sun Jan 17, 2021 11:47 am ] |
| Post subject: | Re: Rebuilding/improving np 242 select trac |
Yes. Dodge trucks and suvs came with the 242hd. I believe some parts will swap. Such as the wider (stronger) chain. Googke. But people have been doing this on jeep xj so and wj I believe |
|
| Author: | mercdude [ Tue Jan 19, 2021 4:53 pm ] |
| Post subject: | Re: Rebuilding/improving np 242 select trac |
Ok. So thanks for making me aware of the 242hd. What I’ve found out: The 45rfe trans early kjs probably have the best bet at getting an upgraded 242 select trac with a swap from a 01-03 gc wj 4.7 v8 - they share the same trans. Those np242hd come with a wider chain and sprockets and a longer input shaft but otherwise has the same output splines ats the kJ np242 at 32 teeth. So basically the kJ 242 is an upgraded select trac from the gc 4.0 but isn’t as stout as the hd units. Not sure it’s worth the upgrade considering swap problems like linkage and selector positions etc. but! It’s a fun idea!!! Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|