LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Which nut? WAS: Torque value for the front sway bar nuts
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=939		 Page 1 of 1
Author:  dirtykj [ Fri Aug 05, 2005 8:14 pm ]
Post subject:  Which nut? WAS: Torque value for the front sway bar nuts
I see these torque values for the front sway bar:

Stabilizer Bar Clamp Nut 110
Stabilizer Bar Link Upper Nut 100
Stabilizer Bar Link Lower Nut 85

Question is ... which one is the "clamp nut"? Can someone describe to locations of these three named nuts? :D

Thanks!
Author:  USPLibby [ Sat Aug 06, 2005 2:19 am ]
Post subject: 
The Upper on Lower bolts are on the ends near the tires and connected to the swaybar link.

The Stabilizer Bar Clamp must be the 2 rectangular bushings in the middle of the Bar, two bolts each.
Author:  Skyjump136 [ Sat Aug 06, 2005 10:12 am ]
Post subject: 
That's correct. The clamp nuts are the ones that hold the bushing and metal bracket over the stabilizer bar and essentially pin it to the cross member.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/