Hey all, just wanted to drop in and say hi, just bought my first Liberty, and CRD at that. Not new to the diesel world in general, as I've owned several Dodge Cummins over the past decade, but new to the Liberty. My buddy turned me on to them, as he has an 06 also. Just picked it up from the dealership today, and I started digging through the forums to figure out what all I needed to do immediately.
My buddy mentioned several issues with the stock CRD's, so I figured I'd start with addressing them. The only issue I seem to be running into is the pictures in the threads aren't showing up? Do I just not have enough time in the forum to view them, or is something else going on?
Other than that, I'm glad to be here, and I can't wait to get going with the info I'm already finding here!

_________________
96 Dodge Ram 3500, 4x4 5 spd manual 12v Cummins, compound turbos, maxspool cam, ATS manifold, DDP injectors, Mahle pistons, ARP headstuds, DD3600, 5kgsk, and some more stuff.
06 Jeep Liberty CRD, EHM, GDE FTEco Tune.

More then likely just old pictures and welcome to LOST glad to see another CRD owner. Where in North Carolina are you located?

_________________
My CRD Build Thread
Soon to Come:more lights

Sneads Ferry, near Camp Lejeune. The pics were in the tech section, of the newbie read thread. I did find something about IE9 not working right with this forum...I'll have to do some more digging on that part!

_________________
96 Dodge Ram 3500, 4x4 5 spd manual 12v Cummins, compound turbos, maxspool cam, ATS manifold, DDP injectors, Mahle pistons, ARP headstuds, DD3600, 5kgsk, and some more stuff.
06 Jeep Liberty CRD, EHM, GDE FTEco Tune.