It is currently Sun Aug 09, 2026 2:07 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: colorado guy in need of some help
PostPosted: Mon Feb 25, 2013 3:05 pm 
Offline
LOST Newbie

Joined: Mon Feb 25, 2013 2:12 pm
Posts: 4
2005 jeep crd where to begin. alright 8 months ago i had loss of power black smoke my wife audree calls me says she is broke down i went to go get her i limped it home i found a blown cac hose, replaced ran great. about 3 months ago i order parts to do the timming belt and all the other stuff. about a week before i do the belt ect. it starts lossing power, black smoking,turbo lag. i replace the timing belt put it all back together it fires up runs fine still with a little smoke and power loss, a week after the belt audree calls me and says the jeep wont start, it knocks real loud i told her id come get her and as she hangs up it starts, she got it home and i went out to look at it, it fired up without a problem, i turned it off and tried to start it again it had lost fuel prime and it was just crainking and knocking real bad so i pumped it up with the hand primer it fired up no problem. i researched fuel problems on this car and alot of people had problems with the filter head, so before i could get the chance to really diagnose any thing it was a cold morning and i broke the hand button on the fuel head so i replaced it that turned out not to be the problem. so audree is driving it having to prime it up here and there then it threw a check engine light i scanned it and it came up with 2 codes one was cam shaft sensor intermittent bank A and cam shaft sensor bank a A. so i replaced the sensor fired it up no problem shut it off imediatly tried to start and it would crank and knock. if i would let it sit for 5 seconds after turning it off it would start every time. only if i turned it off and tried to start immediatly it wouldnt start so i showed audree the trick of letting it sit and stuff and how to start it i i sat in the car for and hour startinging it and killing it it would start evry time, so then the next morning i go out to start it for her before she goes to work it cranks and knocks same thing, so i primed it up and crank it sits there and smokes but never fires. no check engine light it doesnt feel like its losing prime has anyone had these symptomes or know of anything im missing ill try anything


Top
 Profile  
 
 Post subject: Re: colorado guy in need of some help
PostPosted: Mon Feb 25, 2013 3:16 pm 
Offline
LOST Junkie
User avatar

Joined: Thu Apr 26, 2012 9:04 am
Posts: 871
Location: Tiverton, RI
Welcome to the forum. Come join us in the CRD love that torque forum and our knowledgeable members would love to help. While there, read through the noob guide thoroughly. If I wasn't at work, I would read through this more thoroughly.

Sent from my DROID BIONIC using Tapatalk 2

_________________
2006 Sport, GDE FT Eco Tune, Custom Trans Tune
2015 Ram 1500 Big Horn EcoDiesel, GDE Hot Tune


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com