Hey!

Sadly, my first post on here wasn't to introduce myself, but instead was to dig for technical advice. So here's my intro:

I have a 1994 Jeep Wrangler build in progress. I blew the motor in it a couple of years ago, and picked up a Ford 302 out of an 88 Mustang GT. It's attached to a 2004 Rubicon 5-speed transmission and mated to my stock (excluding the AA SYE and new input gear) transfer case. Other mods include: belly-up skid (also in-progress), MORE boomerang shackles, JKS racing harness, diamond plate rear corners, TJ flares, 3.5" BDS (all 4 front) lift, 2" body lift (may go away.. we'll see), Ford 9" rear w/ 4.88 gears and mini-spool (planning on putting in a normal locker), D44 front w/ 4.88 gears + Aussie locker + WARN premium hubs, Summit marine heater, Tuffy center console, AtoZ Fabrications rear bumper w/ swingout tire carrier, and many other odds and ends. It still needs a heck of a lot of work before it's road-worthy again.

I also have a 2002 Jeep Liberty - bone stock (with the small exception of some slightly-oversized BFG ATs). The motor is shot, so it's getting a rebuild in a couple of weeks.

welcome to the forum what all plans do you have for it i am over in old town trotwood

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

Well, long story short, I'm in the parts-gathering phase of doing a rebuild on it. This is going to take awhile.

Welcome from another Buckeye
Good builds always take a while
Good luck and hope we can help out.
If you need an engine and or trans etc I know where there is one at in Columbus area you maybe able to snag. That is if you don't want to rebuild yours and get it on the road right away

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

What all are you needing

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.