4x4kayak2112 wrote:
Wasn't your dads KJ 2wd? I think I'd look funny being no front drive shaft.......
Sent from my Home Phone using Tapatalk
Sent from my Home Phone using Tapatalk
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wanting to make my 2007 KJ SFA http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=43&t=76153 |
Page 1 of 1 |
| Author: | lil_long_tall_texan [ Tue Jul 30, 2013 12:58 am ] |
| Post subject: | Wanting to make my 2007 KJ SFA |
So I am going to be getting my dad's liberty as my first car and I would like to make it SFA. So what is a list of things I need to do if I want to keep the stock rear axle and make it SFA? Oh and the jeep is long_tall_texan's 2007 Light Khaki 4x2 Sport - Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink - Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's - DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers - Removed Rear Sway Bar - Removed Rear Vibration Damper - 94,000 miles on it |
|
| Author: | JeepMorrison [ Tue Jul 30, 2013 8:14 am ] |
| Post subject: | Re: Wanting to make my 2007 KJ SFA |
Wasn't your dads KJ 2wd? I think I'd look funny being no front drive shaft....... Sent from my Home Phone using Tapatalk |
|
| Author: | TheBlueKJ [ Tue Jul 30, 2013 9:21 am ] |
| Post subject: | Re: Wanting to make my 2007 KJ SFA |
4x4kayak2112 wrote: Wasn't your dads KJ 2wd? I think I'd look funny being no front drive shaft....... Sent from my Home Phone using Tapatalk
|
|
| Author: | long_tall_texan [ Tue Jul 30, 2013 1:33 pm ] |
| Post subject: | Re: Wanting to make my 2007 KJ SFA |
Why yes. Yes it is mine. And it is still mine until he turns 16 in January. He wants to do an SFA and 4WD conversion to it. Going to be a long term project. But I told him to join here and start looking into what he will need so we can start building the parts pile. I'm planning to get myself a Rubicon JK Unlimited when I pass my beloved KJ down to him. So what are your suggestions for budget conscious, yet reliable and fully capable SFA conversion? What XFer case? What front axles are same width as existing KJ rear axle? Going to stick with the stock rear axle initially. It already has 4.10 gears. May need to go lower than that though depending on tire size he ends up with. Sent from my rooted SGS4 with TapaTalk II |
|
| Author: | tommudd [ Tue Jul 30, 2013 1:47 pm ] |
| Post subject: | Re: Wanting to make my 2007 KJ SFA |
Lots of great information in the SFA section, no use going through it all here when its right there 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|